A new generation of environmentally friendly removable glue, Shenzhen of Friends of low-cost promotion

The company specializes in the production of removable glue, the product through the international SGS certification authority. Widely used in the production of multiple paste (also known as the Post-it, posted notices, N, stickers, repeatedly paste, paste business, etc.) advertising paper brick removable adhesive, ramps Notepad; can also be used to make other reusable paste peelable adhesive products, such as: advertising paper, trademarks, labels and other products. Without leaving any traces after peeling does not cause environmental pollution, it is a green environment-friendly products. Its adhesive properties, and then peeling performance indicators, anti-metastatic properties of adhesive properties and storage stability at home and abroad have reached the first level ridge. , Does not contain environmentally harmful substances, as many times after the shift from the adhesive tear will not damage the material surface and leave glue stains, quality and reliable. ?? Mainly used for the production of N times posted: business, posted notices, repositionable note paper, self-adhesive albums and requires re-peeling equipment. ? Glue glue Stir before use to prevent uneven distribution of molecular coating process, resulting in inconsistent quality; the case of a portion of the water is absorbed by the paper during the coating process, the glue will gradually thicken available Add water to dilute, but not too much, so as not to undermine stability and can not use glue; adhesive thickness should be adjusted to moderate, and confirmed after drying (if the glue is dry, then press-stack will produce colloid transfer) paper to the desired thickness of the entire folded, cut into different specifications; for adjustment of the cutter pressure of the pressure when cutting the finished product, the pressure is too high will cause damage colloid, resulting in the following paper tore easily when peeling paper. ? Glue should be stored in a cool dry place, avoid heat and freezing, storage period of 12 months Note:? Due to individual construction environments, different conditions and materials, should be fully tested before use ?? use: the physical state of the product with white latex close, can be directly coater coating, screen machines screen coating, but also small quantities by hand coating. After coating machine subject to 55 ℃ -60 ℃ drying; Melaleuca rack mesh coating need to be placed 1-1.5 hours to dry, (transparent when dry) after confirmation dry paper folded to organize your desired thickness, cut into different starting specifications. If the glue is dry, then fold immediately organize pressure will produce colloid transfer; for adjustment of the cutter pressure of the pressure when cutting the finished product, the pressure is too high will cause damage colloid, resulting in the following paper tore easily when peeling paper, so use must take over as glue to dry, dry paste can be repeated without a trace. Times posted removable glue parameters: Test items index Appearance milky viscous gum PH value 7-8 Viscosity (20C) Pa.s 80-100 solid content coating amount% 48 ± 1 g / m 12-16 peel strength, N / 25mm 2.3 24 hours after the peel strength, N / 25mm 2.5 is repeated 100 times paste peel strength, N / 25mm 1.0 24 hours after metastasis-free rubber adhesive transfer total volatiles (voc) on a substrate, g / L ≤2 benzene, g / L 0 formaldehyde, g / kg 0 storage period, months ≥6??????????????