Electronic components fixed plastic insulation adhesive

AP-688 one-component RTV silicone rubber a Review (customer case: Huawei, ZTE and Gree) AP-688 is a one-component neutral cure by moisture in the air caused by condensation reaction to release a low-molecular cross-linking, and vulcanized into high performance elastomer. After curing the elastomer has good electrical performance, anti-aging, high temperature resistance, insulation, moisture does not swell and most metal and non-metal materials with good adhesion, it can be for a variety of electronic components for the sealing and the surrounding environment does not produce pollution. Superior (UL94V-0) flame retardant properties. This product complies with RoHS directive by UL safety certification (File NO:. E257078). Suffix Color: W (white), B (black), G (gray). No. Test items Performance Appearance white, gray, black, cream 2 dry time (min) 1 ~ 20 3 hardness (Shore A) 45 ~ 75 4 Elongation (%) 100 ~ 3005 Tensile strength (MPa ) ≥1.0 6 bond strength (MPa) ≥1.0 7 Volume resistivity (Ω.cm) ≥1.0 × 1014 8 breakdown voltage (kv / mm) 20 ~ 25 9 a dielectric constant (60Hz) 3.0 10 dielectric loss factor (60Hz) 0.003 11 flame retardant UL94 V-0 Second, the technical characteristics (Note: Data for the room temperature tests) Third, use of the product is mainly used in AC, DC various power inverter high-voltage part insulation bonding and sealing; also apply to PCB-sensitive components, capacitors, transistors and other fixed and bonding. (Capacitors, inductors bonding) use of methods and precautions 1. Clean and dried to be sticky surface, hand squeeze tube or install special extruded plastic extrusion equipment can be. 2. Sizing thickness not exceeding 6mm. Sizing fully dry after 24 hours, 7 days, the highest intensity, until the force do not fully cured. 3. The sizing process is not a one-time run out, pay attention to sealing a plastic mouth; avoid contact with the eyes when sizing; construction and curing process can not be closed, should maintain good ventilation. Fifth, packaging and store the product noted in the different needs of customers into different colors in different packaging, color: white, black, gray, packaging: 100ml aluminum tube, 300ml, 2.6L plastic tube, the product is non-toxic dangerous goods, to avoid the rain and exposure, stored in a cool (26 ℃ or less), dry place, shelf life of six months.