Dongguan Fenggang crafts electroplating process

Dongguan City-bond plastic products Ltd.: http: //www.dgguangjiansj.com electroplating factory in Dongguan, Shenzhen electroplating plants, electroplating factories in Guangzhou, Dongguan vacuum electroplating factory, the role of Dongguan plastic electroplating factory in Dongguan plastic plating and coating requirements: Decorative of vacuum plating coating generally divided into two undercoat and topcoat. In order to meet the technical requirements of different products can be applied basecoat and topcoat, or on the surface of the coating and then applying a color coating, protective coating and the like. The main role of these coatings are: to improve the adhesion film. Using the same deposition method, applied on a plastic substrate and then vacuum coating primer layer can improve the adhesion film. Reduce plating surface roughness, increase brightness. Usually there are microscopic plated surface roughness, the thickness of the coating is not necessarily leveling, can fill plating surface defects, so that the plating surface of the mirror flatness. Protects the metal layer. Vacuum coating layer is typically only 100nm, the film's poor abrasion resistance and color capability, applying the topcoat, the coating layer is not in direct contact with the outside world, on the plated layer can play a protective role. Tel: 0769-23110375 Fax: 0769-23110379 Contact: Miss Wang Hou 13509216341 13509207895 Address: Dongguan Dongcheng Science and Technology Park, Guanghui Industrial Zone