PE wood repair putty | PE putty | Polaroid Putty | Styrofoam Putty | furniture PE putty | PE ..

PE putty / PE putty / Polaroid putty / Polychrome putty / two-component putty / Transparent putty modern furniture and wooden products, because the structure of wood joints, or defects in the wood itself, big hole, will be reduce its aesthetics, use "PE putty" repair and cover grooves, cracks, nail holes, etc., can effectively fill the defect. Product Description: Scope: Suitable for wood flooring repair, furniture surfaces, wood and other products, filling restorations. Features: 1. transparency, by adding special filler, after shave spray paint will not affect the transparency of paint, but there will be no white phenomenon; 2. Populate strong, easy construction, can easily scratch hole into the wood; 3. Anti-subsidence, cracking, do not shrink after scraping and other processes, its obvious anti-sag properties; use parameters: Construction conditions: temperature 10-40 ℃, humidity ≤85% construction way?? : Scratch time after mixing:? ≤20 minutes spraying consumption of paint:? Press furniture construction methods, varies 150g / 1㎡ (mixture) actual spraying area construction method, spraying tools and environment. ? Drying time: dry ≤15 minutes, can be polished ≤2 hours (25 ℃) / Table dry ≤30 minutes, can be polished ≤4 hours (10 ℃). Packaging and storage: 25kg baskets tin packaging, in a cool, dry, ventilated places, avoid the sun and rain and high temperature, away from fire. Under the above storage conditions, the shelf life from date of manufacture of 3-4 months. Note: 1. paint the correct proportions for optimum coating effect, to use our complementary products; 2. the amount based on a reasonable allocation of paint, in order to avoid waste; not added a transparent white water PE putty should be resealed ; 3. suspend or completing work, immediately wash painting tools, to avoid the tool can not be used after hardening putty; 4. Suitable for construction environment: temperature 10-40 ℃ humidity ≤85%; 5. PE putty or direct blow to damp substrates In very wet weather construction, may cause the coating dry adhesion problems; 6. sticky Whitewater rags were rinsed with water and soaked to separate ...; PE putty residue, cured and packaging process to collect All process should be consistent with the local environmental protection requirements of the construction taboos: 1. PE coating initiator (Whitewater); please seal and separately stored in a cool place! Storage temperature greater than 25 ℃. 2. Do not apply when environmental temperature is below 10 ℃ away from the fire, Sealed shade Name: Zhongshan City Fergus Environmental Protection Material Co. Address: Dongsheng Tongle Industrial Zone (State Road 105) Zhongshan Tel: 0760- 85113002 Fax: 0760-22450327 Mobile: 13715593601 Contact: Cheng Xinggang E-mail: 13715593601@163.com Enterprise website: http: //www.zshthb.com