PP material ABS plastic glue stick, five seconds positioning 1202,1202 can stick with sticky PP PE, AB ..

PP material ABS plastic glue stick, five seconds positioning 1202,1202 can stick with sticky PP PE, ABS, PC, alloy plastic and PMMAPP (polypropylene) glue H-1202 The company provides a variety of silicone, metal, plastic glue, transparency, environmental protection, high and low temperatures. Professional and technical personnel for you to solve problems with the bonding program, the state's key technology science and technology enterprises. [Application] is dedicated to the adhesive PP (polypropylene) material, suitable for PP / plus fiberglass, and PE, ABS, PS, PC, PVC, PMMA, PA, silicone, rubber, metal, stone, ceramics, bamboo wood and other materials bonding. [Project and Parameters Appearance: clear colorless liquid temperature range (℃): -????? 50 ~ + 80 fluid viscosity: 60-110 Tensile strength (kg / cm2): ≥195 ± 5 shear strength ( Mpa): ≥32 Curing speed (in seconds):? PP materials and metal bonding, about 20 seconds positioning. PP and PP or other bonding material positioning time is about 10 seconds. [Description] Jinghong H-1202 polypropylene (PP) plastic glue, is designed for PP (polypropylene) plastic bonding and research and development, special fast binder, in line with international environmental standards, through the EU ROHS standards and SGS testing. High performance, high strength, good flexibility, moisture resistance and good characteristics. Easy to operate, can operate manually or dispenser for continuous production line operations. [Operation] 1. Use a dry cotton cloth or sandpaper would then face dust, oil, etc. is removed, then the solvent or special detergent, in order to ensure the sticky surface to be cleaned. 2. Unscrew the H-1205PP treatment agent (bottle comes with a brush), even in the PP to be sticky surface brush again, wait about 10 seconds, the treatment agent to evaporate (the treated material, to be stuck in 60 minutes then completed); and then point the right amount of H-1202PP special glue (small area bonding, can put the needle or dropper to control the amount of glue), can fit. 3, product after bonding glue curing time ranging from a few seconds to a few minutes. About 30 minutes to reach practical strength, ultra-high strength is obtained after 24 hours. [Storage and Shelf life Jinghong H-1202PP (polypropylene) special glue, should be stored in a ventilated, cool, dry place sealed;? A prolonged period, it can be placed in the refrigerator (using again, 12 hours ahead of time to come, Place to room temperature before use). ? Shelf life of eight months, expired qualified by the trial can continue to use; PACKAGE:?? 20ML / support, 1000ML / support [Note] Do not Wear knit glove, Jinghong PP plastic glue gloves woven material is absorbed quickly polymerization reaction, the reaction produces high heat will burn your hands. When skin contact;? Accidentally come into contact with the eye, do not rub their hands and rinse immediately with plenty of water or with a warm towel so that sweat eyelids apart, and not forcibly opened, serious and urgent hospital treatment wash with warm soapy water, or removed by Jinghong special glue solution. ? H-1202PP plastic glue vapor irritating, a lot of use in the workplace should be ventilated.