Pulley Lagging

Construction process: 1. To drum surface residue with a shovel to shovel out the melter (plastic shovel) 2. The drum sander sanding smooth surface (polished) 3. roller cleaner will clean after grinding (cleaning) 4. brushing the surface of the drum metal treatment to enhance the bonding strength glue and roller (brush metal primer, dry forty minutes) 5. brushing the surface of the drum first pass SC2000 (gluing) 6. Subject to paragraph After again glue is completely dry, then brushing glue the second time, while brushing glue on a plastic sheet (second brush glue) 7. be the second time the glue does not stick to the back of the hand, you can make the drum plastic packages (paste sheet) 8. plastic bag after use compaction roller or a hammer to be beating the drum, so as to exclude air (exhaust) between the blanket and the drum 9. Finally, I want to note at the seams plastic (plastic injection)