Biomass boiler manufacturer

Description: 1, tall hearth easy combustion of biomass fuels, designed furnace arch according to the combustion characteristics of biomass fuels, improve the fuel burn out and eliminate black smoke. 2, using high-intensity chunk grate, suitable for transporting biomass fuel combustion grate for large-scale installation of the wheel device to increase the safety of the grate combustion easy to adjust. 3, the unique high feed, pull to the feeding device, adapted biomass briquetting fuel, the combustion front of the fire to prevent burning. 4, the unique means of secondary delivery points after blowing the flame, prevent flames fleeing into the hopper, and to strengthen the supply of oxygen to promote combustion and prevent soot formation. 5, reasonable layout heating surface and burning equipment, boiler thermal efficiency higher than the national standard 4 to 5 percentage points. 6, reasonable smoke speed design, the heat surface without fouling, do not wear, boiler heating surface without soot blowing conditions, long-term stay productive, full load and safe operation. 7, all the independent circuit design, the hot water boiler is also using reasonable ejector cycle, the heating surface inside the loop media flow rate higher than the national standards. 8, the chamber outlet dust inertial separator effectively reduce exhaust gas dust concentration and reduce wear and tear on the rear of the heating surface. 9, compact volume than other types of boiler installation with the capacity of small and shorten the installation cycle and reduce the cost of the boiler room. 10, a large volume of water, which will help power protection, ability to adapt to changes in load. Biomass DZL series steam boiler technology parameter table a model DZL2-1.0-M DZL2-1.25-M DZL4-1.0-M DZL4-1.25-M DZL4-1.6-M DZL6-1.25-M fast Rated evaporation t / h 2 24446 rated working pressure Mpa 1 1.25 1 1.25 1.6 1.25 water temperature ℃ 20 20 20 20 20 20 Rated steam temperature ℃ 184 193 184 193 204 193 7.2 7.2 m radiation heating area 8.88 17.44 17.44 17.44 42.33 42.33 square meters convection heating area 90.5 90.95 90.5 18.48 156.07 economizer heating surface area m 18.48 18.48 18.48 18.48 78.48 3.42 grate effective area m 5.19 5.19 3.42 5.19 7.5 design fuel MMMMMM exhaust gas temperature ℃ 159.1 162.6 160.72 162.4 156.46 143.7% thermal efficiency design 79.05 79.24 78.79 79.03 81.75 79.65 Maximum transportation piece weight t 16.5 16.5 28 28 28.5 37.5 Maximum transport size m 5694 * 2704 * 3364 5694 * 2704 * 3366 6743 * 2954 * 3568 6743 * 2820 * 3510 6743 ** 2954 * 3568 7922 * 2810 * 3688 boiler installation Dimensions m 5694 * 3880 * 3880 * 49255694 * 49256800 * 51006800 * 3800 * 3800 * 3800 * 51006800 * 51008200 * 5200 * 5000 import size mm DN40 DN40 DN40 DN40 DN40 DN40 Outlet mm DN80 DN80 DN100 DN100 DN100 DN150 drum wall thickness and size φ1424 * 12 φ1428 * 14 φ1624 * 12 Dn1600 * 14 φ1636 * 18 Dn1600 * 14 Wall Tube Specifications Quantity Iφ51 * 3 30 支 Iφ51 * 3 30 支 Iφ51 * 3 33 支 Iφ51 * 3 33 支 Iφ51 * 3 33 Iφ51 * 3 38 支 IIφ51 * 3 26 支 IIφ51 * 3 25 支 IIφ51 * 3 32 支 IIφ51 * 3 32 支 IIφ51 * 3 32 支 IIφ51 * 3 38 支 Ⅲφ51 * 3 29 支 Ⅲφ51 * 3 29 支 Ⅲφ51 * 3 29 Ⅲφ51 * 3 35 支 threaded pipe specifications Quantity φ57 * 3.5 92 φ57 * 3.5 92 支 支 支 φ57 * 3.5 94 φ57 * 3.5 94 支 φ57 * 3.5 94 支 φ70 * 3.5 98 支 convection bank Specification Quantity / / / / / / factory mode DZL quick series of Biomass Steam Boiler Technical Parameters Table II