Plastic opening open mixing tank polyethylene plastic tank open jar

Steel lined stirred tank use 1, steel lined stirred tank lifting lugs of the rope should be set into the inner lifting lugs when lifting transportation, installation, no rope tying lug of the barrels should be lifting, lifting process Avoid deformed hit the tank, to avoid sharp objects touching the plastic layer. 2, steel lined stirred tank during transport, such as longer or heavier paddle in a sideways position, must paddle reinforcement. Avoid vibrations caused due to transport paddle deformation. 3, stirred tank installed to correct the verticality of gear and propeller, the horizontal position of the lid. 4. Check the reduction gear box oil, must refuel to a predetermined position. 5, when the motor is electrically connected to the shaft clockwise. 6, steel lined stirred tank flange because of its specificity using a soft gasket mating flange should be in, tighten the bolts must rub fresh sequentially, tighten the bolts, non-rigid tighten the bolt, so as not to crush the flange surface. Tighten flange bolts can be divided into two phases, the initial installation stage and work stage, early loading on stage to not leak tight, work phases can be completely tighten the bolts. 7, did not indicate the mixing tank is sealed, because the tank surface Dharma Blue and tank surface manhole not be sealed, thus mixing tank work surface can not exceed Dafa Zealand and manholes. 8, steel lined stirred tank conditions of use, the environment must meet the physical and chemical properties of the polyethylene. Comply with the conditions specified design drawings. 9, the plastic layer is a high-resistance material, so anti-static measures have hit the material was stirred at work the high-value organic solvent. 10, Other components steel lined stirred tank (such as level control valves, flange gaskets, temperature control, pipeline valves, pipes, etc.) material must be resistant to a solution containing substance. 11, steel lined stirred tank export or import pumps and other mechanical equipment should be installed to avoid strong vibration damage flanged, should be installed piping vibration tube. 12, in order to improve the life of steel lined stirred tank, should be avoided in highly corrosive environments, usually to check the corrosion situation steel body surface, good anti-corrosion work. Inevitably highly corrosive environments, the surface should be coated with epoxy steel and corrosion do daily work. 13, to detect liquid leakage orifice flanged people, avoid plastic sandwich etchant penetrate steel body, affecting life