Supply Lansing water quality stabilizer Corrosion Inhibitor

Use corrosion inhibitor for boiler performance maintenance, can reduce labor intensity, it is conducive to the use of the user's direct and regular cleaning and maintenance of the boiler, saving equipment maintenance expenses. It can be completely cleared easily scale, while reducing corrosion rates; and simple operation, safe and reliable; boiler corrosion and scale inhibitors generally do not contain hazardous substances, the simple and can be discharged after treatment, safety and environmental protection. During the cleaning process, H + will cause corrosion of metal body, hydrogen embrittlement occurs; and dissolution of the Fe3 +, Cu2 + and other oxidizing ions cause pitting metal body, copper and so on, so the cleaning agents to be added to the corresponding boiler corrosion inhibitors; Good boiler water treatment agent under neutral or slightly alkaline (pH 7-12) conditions to complete the cleaning and corrosion damage to metal-free; even long-term use will not have equipment mechanical properties and service life of adverse effects. Boiler pickling can not remove all types of insoluble scale inhibitor can be completely removed so clean, even the most stubborn sulfate scale is also still has excellent cleaning effect. The device can also be used in the normal operation of the boiler water treatment chemicals for cleaning, since it does not affect the production, there would be no loss of production. The use of efficient boiler water treatment agent is easy and simple to understand, anyone can complete. Usually a long time in the heat exchange equipment state will have a scale, use Anti-fouling agents for processing in accordance with the specific circumstances of equipment operation, cleaning agents and efficient mixing primary organic corrosion inhibitor into organic cleaning agents; in the course of You do not need to add other additives to simplify and facilitate the clean install and operate the site. Boiler corrosion and scale inhibitors can effectively inhibit the pickling process Brass and copper alloys, carbon composites galvanic corrosion; anti-Fe3 +, Cu2 + ability to accelerate corrosion. Cleaning speed boiler corrosion and scale inhibitors, high inhibition efficiency, clean waste water treatment method is simple, pre-membrane cleaning after favorable. Corrosion Inhibitor full account of the specific circumstances of the user, the main cleaning agent, biocide agents, dispersing penetrating and effective corrosion inhibitors and other organic compound made of organic cleaning agents, when used without adding any additives to simplify and facilitate the cleaning site installation and operation. To warm the pipe in use for some, the pipe wall have a lot of slime, bacteria and scale of production, attached to the pipe wall, formed pipes get clogged, resulting in poor water circulation, heat is not enough, seriously affecting the heating temperature and effect. Data show that after one year to warm, to warm the pipe inner wall of each additional 1mm dirt, it will lead to heat the indoor temperature dropped 5-6 ℃. This not only affects the normal use warm, but also caused a waste of energy. Such as prolonged lack of effective cleaning process, will make geothermal heating system failure, causing embolism can not use an inner tube, and even cause damage to the floor, removal or replacement of geothermal piping system, causing property damage and inconvenience to the user warm.