Xin too abrasive resin wheel

Resin grinding wheel, the wheel is made of resin, high strength, used in cutting, double-end, heavy-duty wheel, polishing wheel and so on. It has a certain flexibility, low heat resistance, good self-sharpening, simple production process and short cycle characteristics; widely used in rough grinding, snagging, cutting and grinding freedoms, such as grinding steel ingot casting deburring and the like. The cleaning method to be used in the production process diamond grinding wheel on the belt. General grinding wheel running 5-7 days to remove for cleaning. (Above a grinding down of the crumb, after high temperature friction tightly attached to the diamond surface, difficult to clean) Now we use acetone soak 2 hours, then washed with imported cleaner, works well, but not environmental protection, not energy . Cleaning requirements: 1, to environmental protection, non-one, can not be halogenated. 2, can not damage the diamond grinding wheel grinding wheel installation Notes must be carefully checked and identification prior to installation. To check the identification of: 1, check whether the correct wheel grades, meets all the selection wheel performance, shape and size. 2. Check the appearance of the structure and differential wheel situation. With the eye whether the appearance of damaged wheel (or cracks). The appearance of damage (or crack) the wheel can not be used. Another requirement wheel ends flat surface, no obvious skew. 3. Check the grinding wheel and differential internal cracks. By hand and wheel, grinding wheel with a wooden hammer tapping hear its sound, no crack crackled wheel, the wheel is cracked hoarse voice, which can not be used. Resin wheel