CS-T-01 Micro-Nano net steel aid

CS-T-01 Micro-Nano net steel aid - refined dispersion of inclusions in steel special Introduction CS-T-01 Micro-Nano net steel additives, is a requirement for high purity steel, small debris content, carbide distribution, high material strength of special quality steel (pure steel, clean steel -clean steel) development, so as to have diffuse thinning harmful inclusions in steel, the effect of improving the mechanical properties of the steel products. Features ◆ refined dispersion of inclusions in steel; ◆ improve the tensile, compressive properties of the steel, while enhancing the toughness of the steel. Use ◆ CS-T-01 has its minimum and maximum usage requirement, composition of the steel, the process conditions, among other factors will affect the amount and effect of the product. ◆ generally recommended CS-T-01 is used in an amount of 0.2% by weight ratio of steel began to experiment, generally no more than 0.5%. Add an excess of CS-T-01, it will cause the steel toughness is too large, reducing the hardness. ◆ CS-T-01 a little stirred easily dispersed uniformly dispersed in the molten steel in the ladle of molten steel poured into the middle of the bottom of the ladle when submerged about 10 cm, the Benxi Iron and Steel aid package required a one-time thrown by steel Stir it momentum. Specifications Net weight per package are as follows: 0.5 kg, 1 kg, 2 kg, 5 kg, 10 kg shelf life of 12 months Note molten steel before the CS-T-01-deoxy-added should be to remove the effect of contrast processing applications and other debris The following is 20CrMnMo (C grade steel for the manufacture of gears heart) test comparison results: No detection mode aids add CS-T-01 non-aqueous electrolysis (the number of inclusions relatively) non-aqueous electrolysis (compare the shape of inclusions )