GLM roller mill Xiangtan Xiangke

Xiangtan Xiangke GLM roller mill machine is ceramics, chemical industry finely ideal laboratory equipment, each large grinding, grinding a ceramic pot. Adjustable roller spacing can be placed 3L, 5L and other specifications of the grinding jars of different sizes according to user requirements. The main technical parameters: the number of porcelain: 4,6 (can be put 3L, 5L and other specifications grinding jar) milling rate: 70 ~ 100r / min Power: 0.55KW, 0.75KW Power: 380V GLM-6 roller ball GLM-6 roller mill widely used in schools, research institutes and ceramics, chemical industry laboratories of powders. The main technical parameters of speed: 50 to 70 turn; power: 0.55KW Power: 380V; grinding jar: ceramic pots roller bottle volume: 5 liters, 6 grinding jars can be placed. With 3-phase plug structure and working principle of this device from the rack, motors, pulleys deceleration component device, the long axis and electrical control and so on. The working principle is motor driven belt deceleration devices, so that the long axis for uniform rotation, so as to drive the grinding jar rotates. Steps will be ready well in advance as required powder, according to a certain proportion into grinding jars (Note: General material: ball: water ratio is 1: 4: 0.8, this data is the reference data, according to the actual situation as adjusted), and then plugged into the rubber stopper on the long axis of the two friction wheels, friction wheel and the long axis of the pitch Users can grind tank length, diameter size to be adjusted after a good tune must only tighten the screws, bearing fastening. 2, power on, press the start button, the grinding jar with the friction wheel rotation, self-polishing time determined by the user, the time and press the stop button, the motor stops, remove the grinding jar, open the rubber stopper to pour the material.