Lanzhou Jiayuguan preferred epoxy clay furan clay Ssangyong

@@1, furan mortar, furan FRP overall surface layer and block material surface layer of furan clay paving, should be in the surface layer of the building and related construction is carried out after installation. 2, during the construction and maintenance, on-site should be kept clean, dry, well-ventilated, and should be waterproof, fireproof, anti-exposure. 3, the construction environment temperature is preferably 15 ~ 25 ℃. Relative humidity should not be greater than 80%. When the ambient temperature is below 10 ℃, deal with construction sites to take heat insulation measures, but not directly heated by an open flame or steam. Structural metal surface should be smooth, clean and dry before construction should rust, welding slag, burrs and dust cleaned 4, furan resin material anticorrosion maintenance period at room temperature: the ground shall not be less than seven days; sump. not less than 14 days, you can conserve a day after four hours when heated at 400C, 600C constant temperature for 22 hours. After cooling to room temperature to use. 5, the front furan resin anticorrosion construction, and construction methods should be compatible with the operating ratio according to the selection of appropriate test construction by environmental temperature, humidity, engineering features and raw materials, and then the large-scale construction. Furan clay, furan mortar furan glass fiber reinforced plastic material formulated. Contact: Jiang Jingli Tel: 0391-7855919 Fax: 0391-7855919 Mobile: 18639903882 Website: www.jzslnscy.com Address: Jiaozuo City, one km north of Xiuwu County