Third-brand high speed medical intensifying screen installation instructions

Usage 1, open the package and check for wear intensifying screen plane, mildew, pollution and so on; 2, before the product layout. Keep two screens are attached to both sides of the cassette, the film is sandwiched between two screens, the back cover of the cartridge, make sure the screen plate contacts. 3, according to the inspection site to set the desired projection conditions, according to equipment instructions. 4, after the X-ray film projection should be developing, fixing, for hand washing in an automatic washing machine, it must operate in a dark room. Product use and scope of application This product is mainly for supporting the use of medical X-ray photography, in order to increase sensitivity. [Note] 1, use and maintain the process should keep the screen clean, dry, pay attention to moisture, mildew and pollution. Such as accidentally infected dirt or developing, fixing liquid, it can be used to wipe cotton flower moistened with a mild soap and water, then rinse with water, wipe off water drops in with a soft cloth, placed in ventilated place to dry, before use. 2, non-intense light exposure and proximity to the heat source, so as not to degrade performance. 3, in order to ensure excellent image radiography, when the following cases, the proposed replacement of the new screens. A, long-term use screen wear, contamination can not be eliminated; B, panel stained development, fixer and not all wash is due to keep and use period or accidentally when significant mildew; C, after a long X ray radiation sensitization coefficient decreased intensifying screen is a normal phenomenon, should be checked regularly updated in real time. [Storage conditions] packaged intensifying screens should be stored at -5 ℃ ~ + 40 ℃, relative humidity less than 80%, non-corrosive gas well ventilated room. [Expiration date] Medical intensifying screens limited period of two years, from medical intensifying screens first started using together.