Hebei epoxy repair mortar

ECM epoxy repair mortar (acid epoxy clay): a strong bond, high strength, acid, anti-corrosion characteristics for acid tank, cesspool, purify pool water treatment and concrete exposed tendons, cellular, corrupted repair purposes. Factory Direct Phone: 010-56256297,15811136304 Houya Ru QQ: 952417608 Website: http: //www.tecai360.com ★ Features 1, with impermeability, frost, salt, alkali resistance, weak acid corrosion resistance, and with strong adhesion of a variety of materials. 2, the thermal expansion coefficient close to the concrete, it is difficult to separate from the substrates to be bonded and durability. 3, in the wet substrate surface construction, without dry, hardened in wet conditions or underwater. 4, the operation to facilitate the construction, with ordinary cement mortar construction, easy to clean, the water can be cleaned. ★ Applications 1, for cellular concrete structures surface defects, such as holes and exposed tendons treatment. 2, concrete structures, stair step corrupted patch. 3, sticky layer made of steel reinforcement and leveling when sticky carbon fiber reinforcement. 4, can be used as water, saline areas and chemical plants and other corrosive environments, corrosion-resistant materials. 5, for pasting acid brick. ★ Technical parameters Detection project performance test results flexural strength (Mpa) 28d 6.0 6.49 Compressive Strength (Mpa) 7d ---- ≥25 28d> 20 35 neutral resistance (mm) 28d <5.0 1.8 Bond Strength (Mpa) at room temperature normal 28d> 1.0 2.8 a thermal cycling 28d> 1.0 2.4 water permeation amount (g) <20 15 24h water absorption amount (g / m3) <1000 525 water absorption coefficient (kg / cm3? h0.5) <0.5 0.32 NOTE : Recommended Reference dosage: 1700kg / tonne ★ use method 1. Check the product packaging intact, check the correct label. 2, open the lid, the pre-batching bucket 3 bags marked A, B, C are removed. 3. A material, B material after shaking, respectively, into the bucket and stir evenly, then marked with "; C"; the powder while stirring slowly into the barrel, stirred into a uniform The mortar-like can. If more viscous or difficult to stir, this package can be added to 1-2kg of clean water and stir, does not affect the final performance of the product mixture. ★ Note 1, the product of cement-based materials, which completely curing time required 28 days. 2, the FDA 24 hours can be the next process. 3, Marinated epoxy mortar should be used up within two hours, during this time, such as the situation appears dry thickened water can be added to the appropriate Stir before use. ★ Packing & Storage 1, the product packaging specifications for the 20kg / barrel. 2, unopened shelf life of 12 months, may continue to be used after the shelf life beyond the qualifying test subject. 3, non-toxic, odorless, non-flammable, non-explosive, in line with environmental protection requirements, according to general cargo storage and transportation. ★ solemnly declare any damages caused due to incorrect use of the company unit. Construction Follow the instructions with the instructions of the relevant questions, please consult your local dealer or our technical service department.