Shaoxing Plastic Geogrid offer the most complete

Plastic Geogrid Introduction: Plastic Geogrid Related to high-strength steel (or other fibers), with a special treatment, and polyethylene (PE), and add other additives, become through out the anti-strength composite Pull the strip, and the embossed surface roughness, compared with high-strength geotextile reinforcement. This single band, the vertical and horizontal spacing of weave or clamping arranged with special welding technology welding to strengthen bonding and molding of their intersection, was reinforced Plastic Geogrid. Plastic Geogrid divided into three types: ordinary steel geogrid, steel-plastic convex node geogrid Plastic Geogrid and mine. Ordinary steel geogrid main raw material is polypropylene (PP), steel wire through ultrasonic welding, and then processed into a mesh to form a grid, the advantage is wider than plastic geogrid, ordinary type of plastic geogrid only reach 4 m, while steel geogrid up to 8 meters, pulling at 20KN-150KN. Protruding node Plastic Geogrid Plastic Geogrid ordinary upgrade, change the general grid nodes only small peel force (30N), solder easy to crack, resulting in construction difficulties, reduce the role of the anti-side shift Small and other shortcomings, and to further improve the product. Due to material ratio, change the construction process, the welding junction between the peel force of 500N-600N, effectively change the above disadvantages of the conventional steel-plastic geogrid. Protruding node Plastic Geogrid general application on two different hard and soft ground. Plastic Geogrid mine is a dedicated to the new coal mine safety net, compared with a metal fence, with a lightweight, high strength (mine steel plastic geogrid only 1/3 of metal mesh, but the tensile strength not less than ordinary steel), does not rust, easy handling, easy installation, low elongation (usually no more than 5%), and other prominent advantages, and lower production cost, comprehensive benefits obvious. Second, steel geogrid What are the characteristics: 1, strength, creep, to adapt to all types of environmental soil and fully meet the tall retaining wall in highway use. 2, can effectively improve the bearing surface of the embedded reinforcement locks, occlusal function, greatly enhanced foundation bearing capacity and effective lateral displacement of soil constraints, and enhance a solid foundation of performance. 3, compared with the traditional grid more strength, strong carrying capacity, corrosion resistance, aging, friction coefficient, hole uniform, convenient construction, long life and other characteristics. 4, more adapted to deep-sea fishing, embankment reinforcement, a fundamental solution to the low intensity of other material of the gabion of long-term water erosion caused by poor corrosion resistance, short life technical problems. 5, can effectively avoid the construction process is rolling equipment, damage caused by construction damage.