Long Sha Jia Long waterproof _ Ka Fuzhou, Jiangxi building materials tile adhesive Merchants

Ka tile adhesive Product Name: tile adhesive Scope: Suitable for all kinds of interior wall or floor tiles pasted for cement mortar, concrete, concrete panels, blocks and other stick tile and thin stone wall requirements. Base requirements: 1, the base surface should be dry and clean, no grease wax and other loose material. 2, the surface of the base surface should be a strength, and requires a basic flatness and verticality. 3, if cracks or irregularities, to be pre-patch. 4, if the paste base is anhydrite, aerated concrete, precast cement board or gypsum plaster surface treating agents need to pre-dry brushing interface allows the FDA rear. Usage: 1 per pack mix tile adhesive need about six liters of water, using electric mixer, stirring the product into the mixing bucket and stir until evenly without lumps, so that the slurry was allowed to stand 3-5 minutes, then stir once, mortar can be used. 2, and the base surface for different materials, can be thin or thick coating coating construction. 3, according to the size of the table tile use of different deep tooth scraper, to ensure effective pasted area, at least 65 per cent of tile adhesive tile whole area. 4, the first full batch of mortar with a flat spatula to the base surface and having a certain thickness (greater than teeth deep degrees), and then pull out the tooth scraper striped, striped pull process, to ensure that the layer thickness to meet the design requirements, and keeping the blade flat and grass-roots intersect plane 45 degrees to 60 degrees. The amount of deep tooth scraper tile size 200mm * 200mm about 3kg / m 6mm 300mm * 300mm about 4kg / m 8mm 300mm * 300mm than about 4.8kg / m 10mm 5, tile position can be adjusted within the prescribed period of time to achieve the best results. Excess mortar to be removed before curing, use only mechanically removed after curing. Technical requirements: Pressure shear strength / Mpa standard state water ≥0.7 ≥1.0 ≥0.7 freeze cycle Lai packaging, storage and shelf life Store in a cool dry place, unopened can be stored for 6 months Packing: 20kg / bag Note 1, the construction site The temperature should be between 5 degrees to +35 degrees, avoid strong sunlight and rain. 2, the temperature is too high, the wind speed is too large or outdoor construction, consult a qualified technical advice. 3, for low water absorption tiles pasted technical advice, please consult a professional. 4. This product contains cement, water produce alkaline reaction. So please protect the skin and eyes. In case of skin contact, wash with water in case of eye contact, flush with water and seek medical assistance. 5. Do not let children contact, inhalation or eating harmful.