Ka-licensing tile adhesive manufacturers _ Changsha Merchants

First, the product referred 绍嘉龙 brand tile adhesive properties are accompanied by different polymers and related auxiliary good crack resistance, can improve a special adhesive bond strength fibers mixed with cement made of high-quality knot mortar. Second, the product features of this product strong bond, low shrinkage force, resistance to cold, good weather, heat, water resistance. Third, the scope for the thermal insulation system surface layer bonded tiles, mosaics, marble and other wall decoration materials. Fourth, product performance Table Test Item Unit Performance tensile bond strength Mpa ≥0.60 crimping ratio - ≤3.0 compression shear strength of the original strength Mpa ≥0.60 water temperature 7d Mpa ≥0.50 7d freeze-thaw 30 Linear shrinkage% ≤0.3 Fifth, construction method, construction of the wall to be wet (wet outside in dry), and maintain a certain flatness, uneven or very rough parts leveling with cement mortar and other materials. 2, grass-roots must be removed from dust, oil, wax, so as not to affect the bond degrees. 3, the product can be moved after pasting tiles corrected within 5 to 15 minutes. Cement ratio is about 1: 4, the adhesive should be used after stir (the temperature at about 20 degrees) in 5 to 6 hours. 4. Apply the adhesive on the back of mixed paste material brick, then press firmly until the plain so far. Actual differ due to material consumption, per square meter generally at least about 4.5 to 6 kg, paste thickness of about 2 ~ 3mm. VI Notes 1, construction temperature not lower than 5 ℃. 2, before bonding to water to clean the wall, be smooth, should be free of dust, oil, water lubricating wall is too dry. 3, with a good mortar should be used within two hours. Packaging: bag free shipping