Insulation joint quality insulation joint manufacturer

Insulation joint quality insulating joint manufacturer Product Overview: insulated joints are both buried steel pipeline desired sealing performance, strength and electrical energy required corrosion insulation can collectively pipeline joints. It includes assembly, insulation boards, packing, sealing rings, short sections. Structural features: Insulation extrusion welded joints with the overall pattern, shall not be used bolt flange connection type. Insulation joint use of the insulation and sealing material sandwiched and fixed to the sleeve (assembly) of the type. After insulated joint assembly, each internal component shall be fixed in the appropriate location. Under pressure in the soil, the provisions of the pipeline operating pressure and the factory or in the field of hydraulic test, the entire insulation joints intact. Insulation joint sealing element against the insulation plate inside the joint, with a permanent elastic, and both sides of the sealing element does not move in direct contact with the exposed metal surface to ensure tight joints. 2, structural features: Insulation extrusion welded joints with the overall pattern, shall not be used bolt flange connection type. Insulation joint use of the insulation and sealing material sandwiched and fixed to the sleeve (assembly) of the type. After insulated joint assembly, each internal component shall be fixed in the appropriate location. Under pressure in the soil, the provisions of the pipeline operating pressure and the factory or in the field of hydraulic test, the entire insulation joints intact. Insulation joint sealing element against the insulation plate inside the joint, with a permanent elastic, and both sides of the sealing element does not move in direct contact with the exposed metal surface to ensure tight joints. 3, the product features: a, insulation can be good: 500V shake table testing insulation resistance ≥5MΩ, breakdown voltage ≥3KV. b, long life: the pipeline with life, equal strength. c, high strength: Pressure test ≥15PN (design pressure). d, temperature: -19-80 degrees. e, Medium: oil, gas, water, chemicals, coal slurry and the like. 4. Material Features: This product uses the material insulating materials meet the following requirements: high strength epoxy resin and glass fiber composite laminate, polytetrafluoroethylene. Bending strength: longitudinal ≥390MPa ≥290MPa transverse tensile strength: Portrait ≥340MPa transverse compressive strength ≥240MPa: ≥340MPa absorption: After the invasion of water resistance ≥5108Ω ≤30mg breakdown voltage ≥35KV combination steel body: Q235,20,16Mn, all types of pipeline steel. Short tube: 20,16Mn GB8163-99 X70 X65 X60 X56 X52 \ If necessary, please call to discuss!