Tailings tailings slurry transportation pipeline factory

Tailings tailings slurry transportation pipeline factory --- Luoyang, China New Materials Technology Co., Ltd. production of tailings pipelines are high molecular weight polyethylene pipe has "energy saving, environmental protection, economic and efficient" superiority. Contact: Li phone number: 155 -1795 -7863 130 -1474 -1272 QQ: 2778205341 high wear pipeline: http: //www.grcggc.com/ steel lined pipes: http: //www.60692521. com / Address: Luoyang City Mengjin County Airport Industrial Park tailings tailings slurry transportation piping manufacturer - Tailings Pipeline Performance: 1, impact resistance: high tube according to GB1843 standard Izod impact test achieved without damage. 2, wear characteristics: high molecular weight up to 250 million or more tubes, wear resistance 4-6 times that of ordinary steel pipe 3, corrosion resistance: high tube is saturated structure of molecules, can be resistant to erosion of potent chemical substances. 4, good self-lubricating properties - ultra-high tube containing waxy substance, the friction coefficient is only 0.219MN / m. 5, the unique low temperature resistance - ultra-high tube -269 ℃ - + 80 ℃ impact resistance, abrasion resistance properties of the same. 6, easy to scale - The ultra-high pipe friction coefficient is small pipe finish, with good non-adhesive surface. 7, long life - the fatigue strength of the ultra-high tube more than 50 million times, more than twice the PE100. 8, easy to install - ultra quick and simple pipe flange connection, greatly reducing the cost of installation of pipeline construction. UHMWPE English ultra-high molecular weight polyethylene (abbreviated UHMWPE), is a molecular weight of 1.5 million -400 Wan polyethylene. Tailings tailings slurry transportation pipeline manufacturers - Beijing Nonferrous Metallurgy Design and Research Institute "Wear plastic tube test results report" pipeline of four different materials were tested in the same diameter, flow rate, test materials concentrations. The average annual attrition thickness: 1, glass fiber reinforced polypropylene pipe average annual attrition thickness 11.5424mm / years; 2, engineering grade polypropylene tube (PP) 13.5828mm / years; 3, ultra-high molecular weight polyethylene pipe (UHMW --- PE) 5.0104mm / years; 4, steel 36.2424mm / years; test results show ultra-high molecular weight polyethylene (UHMW-PE) pipe seven times the wear resistance of steel pipe. Thus proving the ultra high molecular weight polyethylene wear of the unique abrasion resistance.