Foshan 5 + 12 + 5 soundproof insulating glass

1 point glass installation, glass handling and installation should pay attention to safety, the glass is generally top-down installation. Glass installation to up and down, left and right glue seam on straight, and mix thoroughly. Bezel compact spacing of less than 350mm, self-tapping screws to tighten. Two sides of the use of drilling, tapping, bolt clamping bezel. Dense foam insert rods to a depth appropriate to ensure the plastic glass thickness between 3.5mm to 4.5mm. If the thin glass, plastic, glass curtain wall sealing can not guarantee the quality and prevent rainwater infiltration; to glass, plastic is too thick, easily pulled off, the sealing and anti-leakage failure. 2, when filling glass, plastic, be sure to clean the dispensing face, glass, plastic injection to ensure the quality. When the hanger construction and installation of glass, remember, only down construction. Installation of glass each, if you do, it must be done, good; or else, glass, plastic hard, the glass walk. . . We must rework. Glass is a fragile, very delicate, installation, transportation and use are very easy to go wrong. Do not order a half minutes are free, and let their hard work one more day, wasting a lot of money. 3, transom curtain wall using the suspension, stainless steel bow stays fixed with the enclosed rivets Φ5 × 15, set a good positioning member, to limit the magnitude of open transom, transom ensure safe and reliable.