LED fluorescent tubes do, how much money Australia & NZ SAA - Yellow S

LED fluorescent tubes do Australia / NZ SAA how much money -13,332,928,271 yellow S SAA certified products 1, control type electrical appliances: control type electrical appliances must be made mandatory by the monitoring department issued with a certificate (certificateofapproval), and provides identification (must be marked with the certificate number). It should be noted that the certification process only for security rather than performance or quality, unless associated with security. The first letter of this certificate to display the certificate issued by state or region. Such as: Q91610 (Queensland) W2015 (Western Australia Western Australia) N10422 (New South Wales New South Wales) 2, non-regulated type electrical appliances: non-regulated products, while not mandatory to obtain certification, but its safety responsibility of the vendor / manufacturer , can voluntarily apply for certification. Monitoring department will issue a certificate of conformity meet the standard requirements of the product (CertificateofSuitability) to obtain a certificate of conformity of electrical products can be marked with a certificate number, certificate good last letter revealed that the certificates issued by state or region, such as:. CS / 431 / Q (Queensland) CS / 108 / N (New South Wales) RCM flags: Australia and New Zealand currently being introduced RCM mark (Regulatory Compliance Mark), to achieve a unified identity for electrical products, which marked Australia and New Zealand regulatory agencies have trademark, indicates compliance with safety and EMC requirements, non-mandatory. Products made in safety certification and electromagnetic compatibility registration, issuing safety certification by regulatory agencies or "RCM Registrar" (Standards Australia) apply for RCM logo. SAIGLOBAL Symbol: by SAI (original SAI) presented the product safety signs, the signs are non-mandatory and require factory inspection and so on. Energy requirements apply to the following household electrical: refrigerators and coolers (test standard: AS / NZS44741.1, AS / NZS4474.2) washing machine (test standard: AS / NZS2040.1, AS / NZS2040.2) dryers (Test Standard: AS / NZS2442.1, AS / NZS2442.2) Dishwasher (test standard: AS / NZS2007.1, AS / NZS2007.2) Unidirectional Air Conditioners (test standard: AS / NZS3823.1.1, AS /NZS3823.1.2,AS/NZS3823.2,AS/NZS3823.3) The applicant must submit the application form attached to the monitoring mechanism on the full sample test reports correct and energy labels. Test report must be issued by an accredited laboratory, since the effective date of issue SAA certification process within three years 1, 2 completing the application form, send the product samples tested 3, product rectification (when the test failed) 4, 5 issued reports, report assessment 6, SAA certification issued certificate application what information needs to provide: 1. Samples 2-4 2. Circuit diagram (note parameters must, consistent with the specification plate) 3. Printed circuit layout, component location diagram A line of electronic products are required to provide B if electronic switches, dimmers and other electronic components have been certified 4 can not provide this. English manual (manual or trademark shall have the make, model, parameters, the installation method and the necessary safety warnings) 5. Model difference accounts (if there are several models with series shall be clearly listed the similarities and differences between the models. The statement shall be signed.) 6. Label / plate 7. Product installation diagram / exploded diagram (please specify each part number and part name.) 8. Key parts list (the list must have signature) A format below and the corresponding exploded view of coding in order to list individual parts; B products to fill each one, if a component is only available on certain models, please indicate 9. Copies of certificates of important safety-related components (Refer to "critical parts list" requirement to provide a certificate, and shall number, parameters are consistent with the actual sample check on the certificate) SAA certification cycle: about 4-6 weeks (After the test report down, ready to send relevant information to the agency to apply for Australia SAA certification so relatively long this time) test reports to CNAS National Laboratory reported the SAA fee: this according to the relevant specific product, product assessing data quoted Contact Company: Shenzhen City News Product Technology Service Co., Ltd. Contact: Miss Huang Address: [Shenzhen] Shenzhen Baoan Road Baoan Tongda Road Star Source Technology Park (Code: 518000)