Wenzhou automatic sensor urinal sensor urinals manufacturers

Product control via infrared sensor urinal sensor urinals flushing water facilities, the main advantage compared to conventional urinal for health, water and convenient. Product attributes through infrared sensor urinals reflection principle, when the human standing urinal infrared region, infrared emission tube emitted infrared reflectance due Picks body to block infrared receiver, the signal is sent after the adoption of microcomputer integrated circuit within the processing to pulsed electromagnetic valve, solenoid valve receives a signal to open the valve after the specified instructions to control the urinal water; when the body is left infrared sensing range, the solenoid valve is not receiving the signal, the solenoid valve spool is reset by an internal spring to control small toilet off the water, rinse time and off-time work according to the instruction set. Use when the human standing urinal infrared region, infrared emission tube emitted infrared reflectance due Picks body to block infrared receiver, sent to pulsed electromagnetic valve by signal processing within the microcomputer integrated circuit, the solenoid valve receives a signal After the specified command to open the valve to control the water main features urinal mounting method, the current can be divided into surface mounted sensor urinal induction stingy and concealed urinal. Features: 1. beautiful, generous. 2. Energy saving and environmental protection. Notes 1, there are induction (lights) no water: Check the filter is clogged, if there were rinsed, then open the solenoid valve for cleaning the interior, and then back to its origin, after induction hand, if the solenoid valve spool does not work (opening and closing) of the sound, replace the solenoid valve coil. 2, there is no sense (no indicator light) often water: Check the power supply is normal, if normal power supply, after the hand sensor, light is not on, replace the sensor circuit boards. 3, induction (lights) often flow: First, check if there are impurities in the water filter clogging, and if not, then after the hand sensor, carefully listen to the solenoid valve body is working (with opening and closing sounds, if there is work then open the solenoid valve inside cleaning, then its origin back to 4, induction (lights) water water: Clean the filter and the solenoid valve, and then replace the other described as 1, water: the use of high frequency machine The average amount of water per punch places 1.2-3L; in place using low frequency average per flush volume is 2-4L (Note: The pressure is 0.05-0.7MPa) 2, health: all the flushing action done automatically by the machine. without human operation, rinse thoroughly, leaving no smell, and effectively prevent bacterial cross-infection 3, intelligent: the machine is controlled by microcomputer, based on frequency of use of the urinal and the duration of each use, flush control for intelligent, more effective water conservation. 4, power. trade description on delivery, specific telephone.