After the installation of the heating cable will not waste it

If the concrete layer of warm line is a problem, I could not pull warm line, my investment is not wasted it? Once warm cables are properly installed in accordance with instructions, work breakdown minimal. If a problem occurs, almost regularity are generally because of external mechanical damage, such as screws driven into the concrete layer damage and other warm line. In this case, the fault location can be confirmed immediately, the concrete area on the removal of the damaged section of the clipping warm line, then warm up by the line connecting the special repair material insulation. This is a simple, quick process. Failure rarely work for product quality problems. Both before and after the installation of heating wire resistance measurements should explain, fill shelf after the certificate installation instructions. Secondly, the work could lead to the location of the fault is coupled at the end of the line and the warm, their position should be indicated in the installation sketch, you can easily find out the location and repair. In other more complex situations, use the heating cable fault location detection device to identify and repair.