Chloroprene latex polymer mortar usage and consumption, prices manufacturers

I. Introduction 13520557496 Li latex polymer waterproof mortar is waterproof latex emulsions, special cementitious materials, high quality aggregates are mixed in a special process, the mortar has excellent adhesion, crack, frost , seepage, corrosion, resistance to chloride ion penetration, abrasion resistance, anti-aging properties, suitable for seepage water conservancy, port construction, highways, bridges, metallurgical, chemical, industrial and civil buildings of steel and reinforced concrete structures, corrosion surface protection and repair works. Second, the use of 1, structural concrete reinforcement, waterproof plugging two air defense facilities, dams, ports seepage treatment 3, hot tub, landfills, chemical storage, chemical tank and other chemical resistance building 4, pavement , bridges, tunnels, culverts, concrete repair 5, industrial and civil roof, bathroom, basement seepage prevention treatment for 6, 7 waterproof steel and reinforced concrete, direct construction in the wet base surface, and a variety of substrates with good The bond strength. Third, the main technical performance (Executive Standard: JC / T984-2011 national industry standards) No. Test Item Specification (Ⅰ type) Initial setting a setting time of 1 / min ≥45 Final setting / h ≤24 2 impermeability pressure (MPa) Mortar / 7d ≥0.6 mortar / 28d ≥1.5 3 compressive strength (MPa) 28d ≥18.0 4 flexural strength (MPa) 28d ≥6.0 5 bond strength (MPa) 7d ≥0.8 28d ≥1.0 a project setting time according to user Changes need to be adjusted and quarterly Fourth, the construction Introduction 1, the base surface treatment: In addition to cutting the old concrete surface eroded layer, rinse, remains substantially clean and solid. 2, latex and dry material proportion of 14% -16 mixing evenly. The mixed mortar should pay attention to sun shelter. 3, large paved area available mechanical spraying, cell construction. 4, after construction of the mortar layer shall conserve seven days. Fifth, packaging storage 1, the product is packaged in a two-component. 2, should be stored indoors in a dry, ventilated, moisture, rain environment, the shelf life of six months. 3, latex polymer mortar tasteless, non-radiation, environmental compliance, according to general cargo storage and transportation thereof.