PET-purpose adhesive

A, PET-purpose adhesive Product model name brands use ingredients Characters 868A oil viscosity transparent plastic PP`, TPR, PET, ABS, PS, EVA, PE, sponge ,, plastic, leather, pearl, cloth, metal, ceramics, PET , wood, rubber, and other special graft copolymer transparent solid song 8000Mpa.S Second, use: (1) the adhesive surface wipe clean, remove surface residual grease or mold release agent; (2) the adhesive dry oil Mianbao coating liquid; 1: double-sided glue: (ie, do not touch the sticky adhesive surface, about 3-5 minutes), and other semi-dry surface, and then laminating adhesive surface compaction to close contact. --- The method after lamination adhesive surface, you can reach immediately locate, but the adhesive strength test is recommended after 24 hours. Method 2: single-sided plastic: the material to be bonded to one side of a thin coating liquid, after the glue, the other side of the adhesive surface and the surface of the adhesive glue, can be used after 24 hours. --- On the method after the glue 5-15 minutes before the initial identification of needs, etc., but more savings with plastic, adhesive strength test is recommended after 24 hours. (3) If the glue is too thick can use my company diluent, diluted to a suitable use can (range 10-80% thinner added). Third, to shorten the drying time method: a conditional can be placed in the bonded articles 40-50 degree oven and bake 5-6 hours to reach full dry effect; b temporary unconditional recommends using glue. The method (ie, tools glue stick coated adhesive surface, the glue should not apply thick), and do not use glue down method (ie, poured glue adhesive surface). NOTE: We are at your design and development of special products you need to provide you with the quality and price level green binder, ensures perfect your use, as well as your timely address possible use of technology in the product . puzzle more information, visit the official website: www.sanju-js.com call, please contact Mr. Left: 13532797854