139A oily transparent plastic

I. Introduction Model Name Application component traits 139A oil viscosity transparent plastic PP, ABS, PVC, PS, EVA, PE, sponge ,, plastic, leather, pearl and other special graft copolymer transparent 12000Mpa.S Second, the use : (1) the adhesive surface wipe clean, remove surface residual grease or mold release agent; (2) in a dry oil-free liquid adhesive bonding Mianbao; method, the double-sided adhesive: semi-dry after other surfaces (ie, hand contact adhesive surface is not sticky, about 3-5 minutes), and then laminating adhesive surface compaction, making close contact. --- The method after lamination adhesive surface, you can reach immediately locate, but the adhesive strength test is recommended after 24 hours. Method 2, a single-sided plastic: the material to be bonded to one side of a thin coating liquid, after the glue, the other side of the adhesive surface and the surface of the adhesive glue, can be used after 24 hours. --- On the method after the glue 5-15 minutes before the initial identification of needs, etc., but more savings with plastic, adhesive strength test is recommended after 24 hours. (3) If the glue is too thick can use my company diluent, diluted to a suitable use can (range 10-80% thinner added). Third, the time is shortened method of a conditional bonded article can be placed in the oven and bake 40-50 degrees 5-6 hours to reach full dry effect;. B unconditional recommendation to use temporary coating method (. That tool stick glue stick coated surface, the glue should not apply thick), and do not use glue down method (ie, poured glue adhesive surface). NOTE: We are at your design and development of special products you need to provide you with the quality and price level green binder, ensures perfect your use, as well as your timely address possible use of technology in the product . puzzle more information, visit the official website: www.sanju-js.com call, please contact Mr. Left: 13532797854