Shandong LVL poplar plywood box manufacturers, multi-layered plywood factory outlets

Veneer LVL: Veneer LVL invention relates to a technical field of wood processing technology, which is based on fast-growing wood, low timber as raw wood into veneer, or use veneer cut into pieces with a certain length and width of the veneer strips, dried, after sizing, in one direction, after the highly directional pavement hot pressed wood materials, the characteristics of this material is high unidirectional strength, small deformation, weathering Good production specifications big ape with user requirements advantages, can replace wood lumber, used in construction beams, columns, window frames, door frames, it can be used as scaffold boards, garage, warehouse doors, the finish after as cement templates, etc., to achieve optimal use inferior materials, a small timber Dayong purposes. In fast-growing wood, low-quality wood, broken boards or other low-quality natural materials cut into veneer or directly grow more than 20 times the veneer strips wide, sizing after drying, the veneer strip along one direction arranged in parallel, highly directional pavement, and then hot pressing to obtain a finished product, where the manufacturing process using this method obtained in this wood or wood veneer to a substrate after treatment by the composite material obtained, called single slats laminated timber. [Advantages] plywood surface natural beauty, retention beautiful natural wood pattern, generally do not use glue when other veneer materials, as long as the paint be available after finishing an excellent appearance. Strength, good toughness, strong nail holding power, ease of processing, insulation. It can make up for some of the natural wood naturally occurring defects, such as: small format, deformation, mechanical aspect big difference. Furniture made of lighter than other wood-based panels. Good flexural capacity. Cons: So less overall material used to make furniture, generally used for furniture finishes site. . According to different thicknesses, plywood panels are generally divided into 3% and 5 PCT board, 9 PCT Board, 12 PCT board, 15 cm and 18 cm plate plate six specifications. Since plywood small deformation, large format, easy construction, does not warp, good stripes tensile mechanical performance. So the products are mainly used in a variety of sheet metal furniture manufacturing, interior decoration, residential building with. Followed by shipbuilding, cars Manufacturing, a variety of military, light industrial products, and packaging and other industrial sectors use. For more information please visit Hang Lung plywood Wood Tel: 15998772439 QQ: 2658784236