Yiwu, Jinhua epoxy epoxy floor epoxy epoxy floor paint Yiwu

Epoxy floor paint coating process using a one-time, no matter how much of the area, does not exist in the connection joints, but also a dust-free material, with strong adhesion, abrasion, hardness and other characteristics. It has now been many domestic manufacturers and users to accept and use. Experts said that two types of epoxy floor coverings set the basic processes are - Primary treatment: polished off the loose layer delamination and cement residue, making it hard to smooth and increase adhesion; primer construction: Primer with a good roll coating, knife or brush, so fully wet concrete and penetrate into the concrete lining; Tu construction: the coating material and the amount of quartz sand mixed with stirring with a trowel trowel to smooth dense layer of a certain thickness ; topcoat batch fill: topcoat material coated with silica powder batch, filled in the coating gap between the larger particles, fully cured grinding machine with a dust-free sanding, dust with a vacuum cleaner exhaust; topcoat construction: epoxy paint and After the curing agent mixed, trowel, brush, roller or spray construction method the different sectors of the workshop floor coating performance requirements are different, so it comes to differences in construction methods. When the water-based epoxy coatings do mechanical, chemical, warehouses and other workshop floor, since the required floor impact resistance, rolling resistance, wear resistance, corrosion resistance, etc., so must be applied by conventional processes, namely primary treatment → seal → epoxy primer putty mortar reinforcement layer → → finish. (1) Primary treatment: more concrete floor for oil, 10% to 15% hydrochloric acid scrubbing solution, then rinse with clear water; for large area general concrete floor, electricity mill can grind, remove sand and dust , oil processing methods. (2) Back cover: A epoxy primer, after Part B mixed, applied to the surface of base roll, roll coating is preferably 2 times to fully wet and penetrate into the concrete, from the adhesion enhancement. (3) Middle mortar: adding an appropriate amount of quartz sand mixed with different particle sizes in an aqueous epoxy coatings Stir with a trowel method reaches a certain thickness of the coating to enhance the floor's impact resistance, rolling resistance. (4) Putty: After the epoxy mortar layer is sufficiently cured, Scraping two waterborne epoxy putty, polished smooth after drying, the top coat provides smooth, firm base. (5) epoxy floor paint coating: The aqueous epoxy finish by Group A: B min = 1/1 mass were mixed to homogeneity, brushing or spraying on a base, so that self-leveling, cured become flat and smooth possessed anti-static, anti-corrosion, anti-bacterial sterilization, eliminate the odor and other multi-floor coating. When the aqueous epoxy coating for food, medicine, electronics and other workshops or public venues, bedroom floor, the primary treatment may putty → → → sealing primer finish the construction process. Construction method each process with the former. It requires the construction of the ambient temperature> 12 ℃ and <40 ℃; to 15 ~ 40 ℃ appropriate; air relative humidity <85% is appropriate, preferably 65%, otherwise, the coating is cured bad, affect the coating overall performance. Tu make leveling eligible smooth uniform surface.