Prices Beijing Ying and manual cold laminating machine, cold laminating machine

Brand: Bao Figure 1, the picture is taken in kind, without making effects processing; 2, TS160cm / Φ130mm, width of 1600mm, the rubber roller diameter rolls of 130mm, lower roll is 105mm; 3, brand "Figure treasure card" Lengbiao machine frame are double pole bracket; and chassis width of 38.5cm, (single pole bracket chassis 36.5CM are non-Figure treasure card production) 4, the models have a tripod pictures of equipment TS1600 / 130. Type Lengbiao shop with stand Lengbiao are double pole bracket support a more stable structure, work characteristics:! Lengbiao is the use of cold process, the cold laminating film mounted equipment and image surface, so that pictures a preservative , water resistance, corrosion resistance to ultraviolet light, can keep it new, and do not fade, non-yellowing, but will also make a strong three-dimensional picture of longevity, improve image of artistic appeal. Widely used in modern wedding, art photography, computer inkjet and paintings, posters, ad images, mounted equipment working document data. Laminating is an ideal tool for image processing post-production process, cold laminating machine to complete this process. Second, the use Specifications: ◆ Maximum Frame format: 1600mm; ◆ Frame length used: Any; ◆ maximum mounting thickness: 20mm; ◆ The machine is hand-cranked cold laminating, does not require power. Third, the mounting pressure adjustment: ◆ The machine can adjust the left and right ends of mounting pressure, respectively, equal to the pressure at both ends of the rubber roller. It should first separate the upper and lower two rubber rollers, rubber roller and then cold laminating film on top, turn the knob, and ensure that the upper and lower rubber roller parallel to collide, and then a little pressure. Not too heavy pressure to avoid bubbles mounted equipment in longevity. ◆ attention on both sides of the regulator knob to position the empty drive! The first side of the first down after the knob on the other side must re-adjust the pressure knob down! The knob clockwise to increase pressure; turn the knob counterclockwise to reduce the pressure. Fourth, the component structure: ◆ adjustment bracket (left and right); ◆ table plate (front and rear); ◆ bade round and platen support legs; ◆ rubber roller (upper and lower). Fifth, accessories and maintenance: ◆ rubber roller when cleaning, use a soft cloth dipped in alcohol or neutral detergent scrub with a dry cloth. Absolutely not allowed to use metal and other hard materials. ◆ both sides of the screw to regularly refuel. Cots time when the machine is not in use, should be immediately separated from the upper and lower rubber roller, rubber roller to prevent deformation due to the long time squeeze. ◆ prohibited in certain parts of the long-term Cots mounting hard material! Sixth, the warranty of: ◆ from the date of purchase, within six months of free movement warranty, table boards and other accessories can not be replaced! ◆ If quality problems caused by improper use, parts and materials fees receivable. ◆ beyond the warranty period, the factory long-term maintenance fee!