Supply PDH turn rj45

Description: FE1 / 10-100BaseT protocol converter is to achieve two-way E1 interface conversion and 10 / 100BaseT interface data can be SDH, PDH, microwave, satellite and other transport networks E1 channel convert 10 / 100BaseT data channel. This interface converter for a variety of data communication networks, and the Internet to achieve matching interfaces between different network devices, such as: routers, Ethernet switches and other network interfaces to effectively solve the problem extends Ethernet IP data. Device has a complete self-test function and various ways of testing capabilities, allowing users easy and fast integration of this equipment into the network. Widely used between WAN and LAN networking, monitoring and other occasions. Applications Features: a double lamp, enabling the local device for remote monitoring remote equipment; Ethernet port 10M / 100M, half / duplex adaptive; support VLAN, RJ45 port support straight-through and crossover cables Auto recognition (AUTO-MDIX); clock mode: E1 master clock, E1 line clock; provides three loopback function, namely E1 local loopback, Ethernet local loopback, local Ethernet loopback commands; pseudo random code test function, for the installation and maintenance of equipment brought great convenience; support E1 rate N * 64 (N = 1 ~ 32) is adjustable; Ethernet monitor auto reset function; Ethernet data prompts, real-time prompt data communication state; network management interface uses SNMP. Technical parameters: E1 interface transfer rate: n * 64Kbps (n = 1 ~ 32) Interface features: jitter characteristics meet G.703 standard: meet G.742 and G.823 Pattern: HDB3 code Impedance: BNC75 Europe (unbalanced) , RJ45120 Europe (balanced) Ethernet interface (RJ45) rate: 10 / 100M adaptive protocols: support IEEE 802.3, IEEE 802.1Q (VLAN) Physical interface: RJ45 Block, support Auto-MDIX operation modes: full / half duplex Workers adaptive MAC address table: 4096 MAC addresses can be learned