Small Toner pressure ball machine ball press machine Lishui charcoal blue brand toner ball press machine

"Blue card" Toner ball machine is my factory based on the characteristics of charcoal powders designed specifically for carbon black industry; mainly used for the production of lead and charcoal coals of fire; with pressure, forming rate, high yield, affordable advantage; Toner pressure ball machine to produce products with smokeless, non-toxic, no odor generation, environmental protection, ease of use, minimal ash, heat dissipation and stable quality, suitable for outdoor or indoor ventilation barbecue, this product heat, time is more than twice the traditional barbecue charcoal. Toner molding production process: raw materials → → mixed grind carbonization (additive) → forming → dried packaging and storage Toner ball machine price pressure. Molded products are widely used in urban heating, refractory, power plants, metallurgy, chemical industry, energy, transportation, heating, animal husbandry, industry, agriculture, barbecue and other fields. Charcoal powder ball press machine is suitable for large-scale operations and a single briquette production lines, but also to adapt to mobile operations. Moisture Toner ball press machine equipment had done wet raw materials are have a great impact on the equipment to produce molded ball. So in the beginning of production, the ratio of the material on to stir us, but also to control the particle size, the use of additional binders are also very important. Blue sky sign Toner ball press machine at the time of production which should be strictly controlled ingredients, uniform particle size also tends to make density and distribution have a great gap. So no matter what kind of material in the production while stirring with a good uniformity in order to allow production while allowing the pressure and density properties can have a good control in order to allow the new charcoal powder ball press machine to produce high the quality of the finished sphere. About Sky brand toner pressure ball machine equipment production material requirements are the following: 1, 80-200 mesh material particle size can be. 2, the material is not allowed with any metal object. Otherwise it will damage the roller surface of the skin. 3, feed must meet, should adopt variable speed screw feeder, observe feed back adjustment of the supply amount of new material. Specific production processes charcoal powder blue brand pressure ball machine: a lime kiln after screening, less than 3mm charcoal powder into the high-pressure pressure pressure ball machine ball, ball block size is 35mm * 25mm * 15mm (L * W * H), It can also be customized according to the demand side, to get the ball block bulk density of 1.9-2.2g / cm3, strength and bulk lime fall considerably. After the pressure of the ball after screening, qualified block the ball into the finished product warehouse for smelting use.