Randy Glass Tempering Furnace Tempering Furnace manufacturer Landglass Glass Tempering Furnace

2.2 Measures for controlling thermal deformation temperature unevenness due to heating caused by (1) the temperature difference for the upper and lower surfaces, when the glass is bent upward, indicating that the glass surface temperature. Surface temperature should be reduced, while maintaining the overall glass heating temperature constant, an appropriate increase in surface temperature; when the glass is bent downward, indicating that the surface temperature is higher than the surface temperature, the surface temperature should be lower due to lower, while increasing the surface temperature. If at the time of adjusting the temperature, tempered steel yield and quality are affected, respectively, an appropriate extension of the heating time or reduce the heating time. (2) For the deformation temperature difference caused by the presence of glass in the middle and edge, if the glass showing saddle-shaped, indicating poor insulation or furnace temperature setpoint lower edge, you need to adjust the temperature set point edge; when When the glass bottom of the pot shape rendering, if due to historical reasons, can temporarily laying glass, the first air furnace operation, the furnace temperature is evenly distributed and then poorly; if the temperature setting issue, the need to adjust the temperature setting parameters, so furnace temperature distribution. (3) for the random uneven temperature, you need timely maintenance equipment, to avoid adverse device status, often to clean up broken glass near the temperature sensor, the temperature sensor is accurate to feel the temperature of the furnace, while the topsheet is to avoid more furnace in the same state stacked. February 28 afternoon, deputy secretary of the National Federation, accompanied by Vice-President Huang Xiaoxiang line in the provincial CPPCC Vice Chairman, Chairman of the Provincial Federation of Industry Liang Jing, vice minister of Municipal United Front Work Department, Federation of party secretary Ma Wuli, Municipal Federation of Industry Chairman of the pillars of the Randy inspected the machine (LandGlass); Luolong District Party Committee, Mayor Li Gang hammer, Party Committee, the CMC director Li Xinhong Economic Development, accompanied by inspection. Zhao, chairman and general manager Randy machine (LandGlass), Deputy General Manager Huang Chairman of Premier Zhu expressed his warm welcome to the President of the brief report Randy yellow machine (LandGlass) production and operation and achievements in recent years. When coming inside to see the workshop to the United States, Germany, equipment, Mr Wong said that SMEs want to speed up technological innovation, improve the level of equipment, and enhance innovation capability and so hard, the development of SMEs is the development of private economy, SMEs The future is the future of the private economy! Mr Wong and his party on the development trend of Randy give great recognition, he encouraged Randy on the path of technological innovation further and becoming an international brand of high-end equipment manufacturing industry! Randy machine glass tempering furnace _ Randy Glass Tempering Furnace [] _ ??glass tempering furnace is provided by Randy machines. Glass Tempering Furnace, Randy machine glass tempering furnace, glass tempering furnace Randy Randy Luoyang Glass Machinery Co., Ltd. (www.landglass.com) 2014 has been newly upgraded launched