LDBC curved two-way steel furnace, LDAT combined flat tempering furnace, steel furnace Landglass

[Steel furnace] _LD-BC-way curved steel furnace steel furnace _ Landglass provided by Randy machines. _ Landglass steel furnace steel furnace _LD-AT Composite Flat steel furnace is Randy Luoyang Glass Machinery Co., Ltd. (www.landglass.com) 2014 has been newly upgraded launched two steel production color glass in common colors glass tea glass, blue glass, green glass and the like. The color of the glass, because the color is deep, heated in the furnace to heat absorbed quickly, the glass temperature rises quickly. Production prove the heating time by 5% to 8%, can be mass-produced good quality color glass. Third, the tempered glass glaze glazed glass layer in the surface of the transparent plate glass frit has a specific color by screen or roller printing, followed by sintering, so that the glaze fused with the glass surface an integrally formed decorative effect is very good glass products. In the sintering, while steel processing can be performed. When the steel, under the same heating conditions, since the glass frit darker color, rapid heat, the temperature will be higher than the temperature of the glaze surface side of the non-glaze, baked quenching, if the temperature of the glass on both sides of the upper and lower non- both, will form an unbalanced stress distribution, the glass is warped, deformed or broken. So the glazed glass and steel, you need to set the upper temperature 2 ~ 3 ℃ slightly lower than the lower temperature can, in ensuring burn through the glass case (in which case there may still be uneven glass temperature), look at the actual production conditions, access to good quality toughened glass glaze by adjusting the vertical height of the cooling air gate. Tempered glass flatness deviation and uneven thickness when using one hand reflective optical distortion caused by the glass, on the other hand will also have optical distortion can cause a laminated glass sheet was uneven thickness together when used in laminated glass, causing deformable optics, further visual effects products, local thinning will affect the bonding properties of laminated glass products; glass curvature if not, when applied to hollow glass, in co-extrusion films cause iso-glue uneven, affecting the appearance quality, also affect the quality of the seal, and may cause local thick, further affect the installation. Thereby controlling the flatness of tempered glass is very important.