Sky licensing mechanism charcoal equipment graph price mechanism charcoal, charcoal mechanism

Environmental protection mechanisms charcoal equipment is the main equipment to produce charcoal, charcoal production and charcoal waste material can be used, not only to solve the problem of waste material, re-use, but also to ease the high demand for charcoal in the market. Charcoal in actual use, some time because it will result in a low yield rods charring. The main reason is that in the process of charcoal carbonization caused by too much oxygen. 1. Improper ignition position: the ignition position is too close to oxygen hole in oxygen hole (kiln door) produce fire, resulting in a large number of charcoal kiln door at the phenomenon. To solve this problem is to correct the ignition position, the ignition position so close to the central body of the kiln. 2, raised temperature process too long: sometimes may be due to staff negligence charcoal kiln close time, which led to the raised temperature for too long, wasting some good already carbonized charcoal. Mechanism charcoal factory. 3, kiln flue nowhere: automatic mechanism charcoal equipment will inevitably lead to a prolongation of the flue nowhere carbonization time, so that it is bound to burn some of the multi-charcoal, so when loaded kiln must ensure that the chimney flue open . Sky licensing mechanism charcoal production run will appear in the production of charcoal friable phenomenon, that is what causes it? 1, forming part of the mechanism charcoal, because the system of rods is the result of high temperature extrusion molding of charcoal, so the use of the process, the pusher rods machine will be a certain wear and tear, so that the pressure of not pressing to, so to produce charcoal will form density is not up to the appearance of non-lubricated and other phenomena, such density of less than charcoal burning in the back of the completion will be very fragile, while this kind of charcoal is also not on sale price . Mechanism charcoal suppliers. 2, causing charcoal is charcoal reason fragile division in charring due to lack of experience, poor control of the firing temperature and the heat, charcoal burning uneven, make charcoal brittle. Which mechanism charcoal. 4.12 environmental protection mechanisms charcoal equipment is the main equipment to produce charcoal, charcoal production and charcoal waste material can be used, not only to solve the problem of waste material, re-use, but also to ease the high demand for charcoal in the market. Charcoal in actual use, some time because it will result in a low yield rods charring. The main reason is that in the process of charcoal carbonization caused by too much oxygen. 1. Improper ignition position: the ignition position is too close to oxygen hole in oxygen hole (kiln door) produce fire, resulting in a large number of charcoal kiln door at the phenomenon. To solve this problem is to correct the ignition position, the ignition position so close to the central body of the kiln. 2, raised temperature process too long: sometimes may be due to staff negligence charcoal kiln close time, which led to the raised temperature for too long, wasting some good already carbonized charcoal. Mechanism charcoal factory. 3, kiln flue nowhere: automatic mechanism charcoal equipment will inevitably lead to a prolongation of the flue nowhere carbonization time, so that it is bound to burn some of the multi-charcoal, so when loaded kiln must ensure that the chimney flue open .