SATA3.0 PCIe expansion card expansion 3SATA +1 mouth opening group built SSD hybrid hard drive RAID card

SATA3.0 expansion card 2.5 SATA + SATAIII PCI-e expansion cards can be set four SATA raid Name: SATA3.0 expansion card brand: IT-GO Manufacturer: Shenzhen City Science and Technology Co., Ltd. guide Warranty: One year applicable: PCIe expansion interface : SATA3.0 applications: extended with PCIe interfaces out four SATA3.0 interface, built-in SATA interface, built-in 2.5-inch SATA SSD hybrid hard drive can be set group RAID; SATA3.0 is the latest expansion card, via PCIe Interface expands four SATA3.0 interface, built-in SATA interface, built-in 2.5-inch SATA SSD hybrid hard drive can be set group RAID; this application is suitable for system control via four PCIe SATA 6Gb / s hard disk, allowing users to use HDD + After self SSD hybrid hard drive users to use the card to connect an SSD solid state hard drive and an HDD mechanical hard drive, the controller can automatically configure the most frequently read data to SSD storage to improve performance, while maintaining a low-cost high-capacity HDD hard drive advantage. Product Features: Support SATA III, 6Gb / s backward compatible with SATA II and SATA I support PCI Express 2.0 X 1 interface chip: original marvell chip slot: pcie X4 Features: Conforms to PCI-Experss V2.0 specification and is backwards compatible The PCI-Express 1.x Compliant with Serial ATA specification in 3.0, x8 and x16 slots are compatible with PCI Express x4. Communication rate supported by a rate of 6.0 Gbps, 3.0 Gbps and 1.5 Gbps of hot-swap and hot-swap. Supports Native Command Queuing (NCQ) support FIS port multiplier switch or command-based switching. Compatible SATA 6G, 3G and 1.5G hard drive. Packing list: 1 SATA III 4-port PCI-Express Controller Card 1 x User Manual 2 x SATA data cable 1 x Driver CD a short iron piece system requirements (6Gbps) is to support WindowsXP / Vista / 7/8 / Server 2008 R2 / 8 / MAC, Linux 2.6.x and above versions