Supply SFXLG two-way rope switch manufacturer

Products rope-way switch is a switch-type sensor (ie non-contact limit switch) is under a limit switch, micro switch features, but also has a sensor performance and reliability, stable performance, fast frequency response, long life, strong anti-interference ability worries, waterproof, shockproof, corrosion resistance and other characteristics. Widely used in machinery, mining, textile, printing, chemicals, metallurgy, light industry, valves, power, security, railway, aerospace and other industries. And has a conventional product shelf product attributes 1, ambient temperature: -30 ℃ ~ 60 ℃ Humidity: less than 85% 2, the number of contacts: opening and closing according to the customer need to increase the two open two closed capacity: AC 380V / 5A 3. Reset: Manual reset 4, the action force: 10Kg Weight: 2.8Kg 5, the limit angle: 15 ° Reliability:> 106 Notice This product ZS type using mobile cam structure, when pulling the rope when either side, drives the cam, the switching action will send a stop signal conversion, Z type with automatic reset, S model with manual reset. Installation and wiring 1, the installation: According to a diagram of a self-mounting plate bolts M12 × 30 will switch to the mounting plate, the mounting plate and along both sides of the switching device is fixed to the tape machine, the position of the following requirements : (1) General The switch is mounted on the conveyor frame, so that the device is lower than the tape horizontal position easy to operate appropriate: (2) the rope (￠ 4mm coated steel wire rope) are tied to the switching arm pull ring hole, two switching intervals less than 40m from the appropriate ends of the rope to be arranged along the line parallel to the tape machine, and install the bail play a supportive role in about 3-4m at intervals to reduce its deflection. 2, wiring: (1) Z-type rope switch wiring instructions to open the back cover, visible switch wiring plug. If lead cable, users do not open the back cover, can lead to cable and direct contact switches, wiring, use a multimeter to check out the normally open, normally closed contact, to prevent the error, then after a good insulation and waterproof tape Good insulation jacket sleeve. (2) the same S-type and Z-type rope switch wiring. Transaction Description Note: 1, wiring reliable connection, insulated seal. 2, rope switch installed on both sides of the rope elastic fit, small deflection, after 拉拉绳 switch can reliably reset.