Lai Bote temperature FRPP defogger

Demister for separating the flue gas entrained droplets. In the absorption tower, the upper and lower secondary demister (horizontal or diamond or herringbone) and flush water system (including pipes, valves and nozzles etc.). After purification of flue gas treatment, after flowing through the two mist, they carry the slurry droplets are removed. Separated from the flue gases out of the droplets together into larger droplets slowly, then down along the demister blade slipped to a slurry tank. In the lower part of the upper level of the defogger, the lower and secondary defogger, each with a set of nozzles header. Set inside the demister wash washing water mist through the nozzle in turn deposited solids. After washing and smoke out of the absorber after purification, eventually into the chimney through the flue gas heat exchanger and clean the flue. Demister body mist by the mist leaves the body, jigs, fixtures, such as a stent according to a certain structure formation assembled. Its role is to capture the smoke gas and a small amount of dust drops, reducing flue gas with water, to prevent fan vibration. Defogger defogger composed blade is the most basic, the most important element, its performance for the operation of the entire defogging system has a crucial impact. Demister blades are usually made of a polymer material (such as polypropylene, FRP, etc.) or stainless steel (eg 317L) 2 categories of material. Demister blade variety. Geometric shape can be divided mansard and streamlined, according to structural features can be divided into 2-channel 3-channel blades and vanes. Defogger layout usually has: horizontal, people shaped, V-shaped, the combination type. Large desulfurization absorber in the use of herringbone arrangement, V-shaped arrangement or combination arrangement (such as diamond, X-type).