Floor splitter, floor insulation piercing connector branch

CTM insulation puncture Clamps Product Overview: 1, piercing structure, simple installation, without stripping insulated wire; 2, torque nut, piercing pressure is constant, to ensure good electrical connection without damage to the conductor, 3, self-sealing structure, moisture, water, Anti-corrosion and extend the service life of insulated wires and clamps 4, Adopted special blades for copper (aluminum) and copper and aluminum butt transition 5, the electrical contact resistance, contact resistance less than the resistance as long as the branch wires 1.1 times, in line DL /T765.1-2001 standard 6, special insulating housing, anti illumination and environmental aging, dielectric strength> 12KV 7, arc design for the same (different) diameter wires, connecting a wide range (0.75mm2-400mm2) CTM Insulation piercing connector performance test: 1, the mechanical properties: greater than 1/10 of the wire clamp grip pull-off force, in line with GB2314-1997 claim 2, temperature performance: at high currents, clamp warm temperature rise of connecting wires L 3, thermal cycling performance: in line with GB / T2317-2000 electrical fittings thermal cycling test standard 4, waterproof insulation performance: in line with GB / T13140-1998 Part 2 standard test requirements related to 5, corrosion resistance: sulfur dioxide and salt fog environments do three times the 14-day cycle test 6, environmental aging properties: UV, dry and humid environment, temperature variations and thermal shock exposure six weeks 7, fire performance: Connect the device through an insulating material Trusted glow-wire test, in line with GB / T5169.4 Chapter 4-10 CTM insulation piercing connector requires three advantages Easy installation: no stripped cable insulation can do cable branch connector is fully insulated. Do not need to cut off the main cable, the cable can be made at any branch location. Installation is simple and reliable, just with a socket wrench, can live installation. Use security: joint resistance to distortion, shockproof, waterproof, fire retardant, anti-aging galvanic corrosion, no maintenance. It has been successfully used for 30 years. Cost savings: minimal installation space, save the bridge, and construction costs. Building applications, no terminal box, distribution boxes, no cable back line, saving cable investment. Cable + puncture clamp a lower cost than other power systems, docking is only about 40% of the bus, is about 60% of pre-branch cable. Installation Method 1, the puncture clamp nut is adjusted to the proper position, the branch is fully inserted into the leg cap sleeve. 2, insert the main line, the main line will have two layers of insulation stripped length of the outer layer of insulation in the connection position. 3, the main \ leg into proper position and parallel to, the first hand-tighten the screw nut, fixed clamp. 4, with the size of the corresponding wrench evenly tighten the nut until the top broken off, the installation is complete. Categories voltage insulation piercing connector according to classification can be divided into 1KV, 10KV, 20KV insulation piercing connector. Classified by function can be divided into ordinary insulation piercing connectors, examine the electrical grounding insulation piercing connectors, lightning arc-proof insulation piercing clamp