Ribs conveyor series

Ribs conveyor Product Overview: wall conveyor structure is flat-shaped rubber conveyor belt on both sides glued to the waveform vertical retractable rubber "skirt", between the skirt and stick with a certain intensity and elasticity of the crossbeam composition box-shaped measure, so that the material in the hopper for continuous delivery. Ribs conveyor can be widely used in coal, food, building materials, chemicals, utilities and metallurgical sectors, the ambient temperature is within the range of -19 ℃ ~ + 40 ℃, transporting bulk specific gravity of 0.5-2.5t / m3 each kind of bulk materials. There are special requirements for the delivery of materials, such as high temperature, with material acid, alkaline, oils or organic solvents and other ingredients, it requires the use of special sidewall conveyor belt. At present, I plant mainly produces large angle belt conveyors bandwidths are: B500, B650, B800 three. Transporting material bulk density of 0.5 ~ 2.5t / m3, the working environment temperature in the range of -19 ℃ ~ + 40 ℃. For conveying high temperature, acid-base materials, oil or organic solvents and other ingredients, requires the use of special sidewall conveyor belt material, our company can be customized according to your needs special transportation dedicated large angle belt conveyors. Ribs conveyor main purposes: 1. Ribs conveyor for general use of bulk materials continuous conveyor equipment, using a conveyor belt with a corrugated wall and transverse bulkheads. Therefore, especially for large transmission angle. 2. The machine can be used in coal, chemicals, building materials, metallurgy, electric power, light industry, food, port, shipbuilding and other industries, in the working environment humidity -15 ℃ - + 40 ℃ transport within the scope of bulk specific gravity of 0.5 to 2.5 a variety of bulk materials t / m3 of. 3. There are special requirements for the delivery of materials, such as: high temperature, with materials acids, alkalis, oils or organic solvents and other ingredients, and requires the use of special conveyor belt. The rib belt conveyor angle within the range of 0 ° -90 °. Ribs conveyor machine layout: In order to obtain better conditions by loading and unloading, the machine adopts "Z" shaped arrangement. That has a horizontal section, the horizontal section and inclined section, and the lower horizontal segment that is expected in the horizontal section of the discharge. Between the upper horizontal section and the inclined section of the convex arc segments connected to the frame, using the lower level between the inclined section and a concave arc segment frame connected to the conveyor belt in order to achieve a smooth transition. 1. The upper horizontal segment: In order to meet the discharge requirements of different heights, head frame into bow stand (headstock height H0 = 1000mm), Chinese headstock (headstock height H0 = 1100 ~ 1500mm) and high-style headstock ( headstock height H0 = 1600 ~ 2000mm). And with this, in the horizontal section were equipped with low convex arcs racks and racks where low legs (equipped with a head frame height H0 = 1000mm), Chinese convex arcs racks and Chinese middle frame leg (equipped with a head frame height H0 = 1100 ~ 1500mm), high convex arcs middle rack-height chassis and legs (equipped with a head frame height H0 = 1600 ~ 2000mm). 2. Tilt segment: Whether the use of a low-level segment, Chinese, or high type intermediate frame legs, inclined section are low type intermediate frame legs. When the conveyor angle β ≧ 45 °, recommended type Ⅱ low type intermediate frame legs. 3. The lower horizontal segment: horizontal section with low type intermediate frame legs.