KSD301 manual reset thermostat, manual reset thermostat switch, does not automatically reset ..

Works KSD301-T1 is an automatic reset thermostat with bimetal temperature sensing element thermostat, electrical work, the bimetal in a free state, the contacts in the open / close state, when the temperature reached When the operating temperature, the bimetal thermal stress rapidly generated action, open / closed contact, off / on the circuit, and thus play a role in temperature control. When the appliance is cooled to a temperature of relocation, contact automatically closed / open, return to normal working condition. Widely used in household water dispensers and electric bottle, sterilizer, microwave, coffee maker, electric rice cooker, air conditioning, laminator and other electric appliances. Technical parameters 1, the electrical parameters: 1) CQC, VDE, UL, CUL AC250V 50 ~ 60Hz 5A / 10A / 15A (resistive load) 2) UL AC125V 50Hz 15A (resistive load) 2, operating temperature range: 0-300 ℃ (optional), temperature accuracy: ± 2 ± 3 ± 5 ± 10 ℃ 3, recovery and action temperature difference: 8 ~ 100 ℃ (optional) 4, Connection: plug terminals 250 # (bend 0 ~ 90 ° may optional); plug terminals 187 # (bend 0 ~ 90 ° optionally, the thickness 0.5,0.8mm optional) 5, the service life: ≥ 100,000 times 6, the electrical strength: AC 50Hz 1800V lasted 1min, no flicker, no breakdown 7 contact resistance: ≤50mΩ 8, insulation resistance: ≥100MΩ 9, Contact form: Normally closed: temperature rise, contacts open, the temperature drops, contact connected; Normally open type: temperature rise, contact connected, the temperature drops, contacts open 10 housing protection class: IP00 11, grounding: connected through the thermostat metal shell and the device ground metal parts. 12. Installation: KSD series fixed copper cap hexagonal, round aluminum cap is installed. Band (M3, M4, M5, M6) screw installation. Advantages with stable performance, high precision temperature control, reliable action altogether and the small size, do not pull the arc, high reliability, long life, less radio interference and so on. When Dimensions Notes 1, using a contact temperature installation, should be charged with snapping the metal to cover up the mounting surface of the appliance to ensure that the temperature effect, should be coated with thermal grease, or other similar thermal performance in surface temperature media. 2, the installation can not cover up the top collapsed, loose or deformed, so as not to affect performance. 3, can not allow the liquid to penetrate the internal temperature, not cause the shell cracks, not free to change the shape of the external terminals. 4, the product is not greater than 5A current of the circuit used, should be selected cross-section of 0.5 5-1㎜2 copper wires; not more than 10A current in the circuit, chose copper wire cross-section 0.75-1.5㎜2 connection. 5, the product should be less than 90% relative humidity, ambient temperature below 40 ℃ ventilated, clean, dry, non-corrosive gases stored in the warehouse.