BobrickB-287 Folding Shelves

Action: shelves hold 100 pounds (45.36 kg) when properly installed. Shelf automatically return to the upright position, the object is deleted. When the shelf, is being used toilet compartment door can not be opened. Specifications: folding tool shelf type should be -304 stainless steel all welded construction; exposed surfaces shall have satin finish of science fiction. Shelf should be equipped with heavy-duty internal spring. Shelves hold 100 pounds (45.36 kg) when installed properly. Shelf should automatically return to the upright position when not in use. Material: shelf - 18-8 S, type number 304,18 (1.2 mm) stainless steel. All welded construction. Science Fiction exposed surface satin finish. It equipped with a heavy-duty internal spring. Mounting brackets - 18-8 S, type number 304,18 (1.2 mm) stainless steel with satin finish sci-fi. Installation: Installing the unit on the wall or near the side of the car door lock with two metal sheets screws, equipped with toilet partition manufacturers, represented by S. point for plaster or dry wall construction, provide concealed backing to comply with local building codes, and then the safety device sheet metal screws furnished. For other walls, providing network BER plug or expansion and sheet metal screws in the decoration, or provide 1/8 "(3mm) toggle bolts or expansion bolts. For particle board or other solid core of partition, sheet metal screws Unit provide or offer by bolts, nuts and washers. For hollow metal separator, provides a solid backing decorative plates, metal screws can be secured to a. of the entire thickness of the partition, if two units are mounted back-to-back, providing threaded sleeve The barrel and screw machine NOTE: providing 5 "(125 mm) gap between the inner surface of the toilet compartment door minimum distance of the front edge of the shelf to allow the door to swing open and closed. Provided above the mounting screw holes to 14-7 / 8 "(380 mm) minimum clearance at any level below the projection.