Kneading machine machine manufacturers price rub rub machine straw cattle with factory shipments

Kneading machine kneading machine factory price straw rub rub machine manufacturers shipped by cattle This machine is my factory according to the current requirements of straw comprehensive utilization of scientific farming, cattle, sheep, etc. and the design of a new type of forage processing machinery. The machine can not overcome the traditional processing soft straw and chaff hard straw feed utilization is low, silage and other ills difficult compaction machine is set in the process as a whole cut rub, processed feed soft, uniform, no induration, help digestion and absorption after livestock feed, feed while saving time, preparation time in favor of silage compaction, artificial Tashi to bale, envelope, pit storage, storage bags are available, 98% of feed utilization law . Wet and dry this unique product design, the appearance of new and generous, high quality steel, durable and reliable, but is equipped with a pulley inertia, to reduce power, play energy efficient results. 1, kneading machine, installation and commissioning 1, the machine should be installed on a flat solid work site. 2, according to requirements with installation of the motor. 3, the rotational direction of the mounting power of the belt should be preceded by checking whether the index chaff guillotine cut in the same direction, confirmation and then install the belt adjustment, and make proper belt tension. 4, did not start before moving to deal Zhacao fixed knife clearance check and adjust it so that the gap adjustment control is not subject to bump at 0.8 mm or less, then the lock bolt. 5, various parts of the adjustment to normal, after confirmation, power commissioning, check all parts for loose fasteners at each rotating parts without abnormal sounds and so on. Features This machine has advanced design, novel structure, smooth operation, energy saving, easy to operate, safe and reliable, suitable for crop straw rub corn stalks, soybean, sorghum pole, peanut vine, so that straw into Feed soft, easy digestion and absorption of livestock, while in favor of dry material, bundling transportation and storage, the majority of rural farmers and small and medium sized feed mills necessary machinery and equipment. Forage film wrapping silage and storage pits, heap storage, storage tower and other traditional silage compared with the following characteristics: Third, the main technical parameters Model Rotor Diameter (mm) spindle speed (rev / min) Auxiliary power (kW) output ( t / h) (dry corn stalks) Price (yuan) RC-300 300 2750 2.2 0.3-0.4 RC-500 400 2900 5.5 0.5-1.5 RC-600 600 3200 11-15 2.5-3.5 RC-600A 500 2500 11-15 2.5-3.0 RC-700 630 1650 11 / 0.75 3.0-5.0 (automatic feed including motor) RC-800A 800 3200 22 6.0-8.0 RC-800 750 1650 18.5-2.2 6.0-8.0 (automatic feed contained motor) Note: Products goes after the color change technical parameters without notice Note: The above quotations are without motor