Dried bamboo shoots machine

Kincaid brand bamboo shoots dryer, heat pump as a heat source, the drying effect is good, the color of dried bamboo shoots after a good, low drying costs, and the drying process does not produce any pollution, in line with the current trend of environmental protection. Kincaid licensing heat pump dryers in drying bamboo shoots in the use of: 1, dig bamboo shoots: shoots began to dig in before Qingming. Digging bamboo to do sheller side to side while digging roots, shoots and then sent to Laos. 2, cut bamboo shoots: when bamboo shoots sent, shall be placed in bamboo bench, then with a knife blade root evenness, the more light the better. If the sludge to be washed. 3, boiled bamboo shoots: skillet cooking oil to use boiling water. Then add water to boil, add bamboo shoots, fresh bamboo shoots pot must plug solid, installed after stamped with fierce heat and simmer 2-3 hours. 4. Rinse: boiled bamboo shoots, remove the pot from the body, put the NPC cask with cold running water rinse, and then use soldering iron all shoot-through section. Let revealing internal heat, easy to press dry dehydration. After a good night rinsed, cut large bamboo body, touching no micro-thermal, already cool thoroughly. 5, press: the bamboo body after rinsing, stump tail layered staggered and flat in the pressing machine inside. Slowly pressurized. Over 1-2 hours, plus heavy weight of virgin pine. Squeeze until the water with foam and slightly red, it indicates that the already pressed. They do not loose juice, it can not deteriorate in a few weeks. 6, drying: the traditional process, generally use the sun to dry, turning regularly require a lot of labor, and easily deformed or discolored, encounter rain bamboo shoots if not dry, prone to mildew and rot. With charcoal, wood fire drying of dried bamboo shoots better than the quality, but the high cost. And during the baking process should smoke easily into the drying room, and the bamboo shoots blackened bad, can not eat. Kincaid licensing heat pump drying function effectively solve the above problem, not only low drying cost, and environmental protection, no pollution, good-looking product color after drying, processing capacity, is one of the best drying equipment used. Kincaid licensing heat pump dryer Features: Features: 1. dehumidification, drying, cooling, dehumidification, ventilation dehumidification drying equipment as one intelligent. 2. With continuous drying, easy to use, with closed dehumidification and heat drying method, the above energy saving, compared to traditional belt 40% energy saving hot air dryer, microwave belt drier than 60% energy saving. 3. Suitable for all kinds of drying temperature below 70 ℃ dehumidification mode, dry and stable, good quality and health. 4. Innovation Wetlands function, exhaust heat recovery fresh air pre-dehumidification technology, refrigerant cold hot heat recovery technology. 5. The unit automatically adjusts the drying time and temperature according to the requirements of multi-temperature section drying process, temperature and humidity curve intelligent control program. 6. To meet the large temperature difference, the temperature gradient line drying process requirements.