High adhesive matte silicone encapsulants

Description: JTF-106 (matt) room temperature curing type silicone encapsulants are mainly directed to the Company's LED displays and other electrical components of the package and the development of potting, but also for electronic components fixed and waterproof, dust and leakproof. This glue has excellent water resistance and heat resistance, can ensure maximum service life of lighting. After curing the product surface is matte state, no glare, light pollution can be avoided. How to use: A and B components by weight of 100: 10 (10: 1) The stoichiometric mixing, vacuum remove air bubbles (also natural discharge bulbs), then potting, and other colloids initial curing or longer time after the product packaging. The main technical parameters: 1. Operational time: 50-70 minutes 2. Dry time: 3-4 hours; 3. Preliminary curing: 6-8 hours 4. Full curing time (5mm): 24 hours; 5. Thermal Conductivity :> 0.66; 6. Hardness: 30-40HA Features: 1, showed a matte surface after curing state, no glare, light pollution can be avoided; 2. High strength, high toughness; has strong adhesion; 3. Good heat resistance, high temperature (long-term use at -40 ℃ ~ 220 ℃) ??and good; 4. Excellent electrical properties, are applicable to most electronic products; 5. Long life, the product life of 10 years, maintenance-free; 6. UV resistant to prevent leakage or ultraviolet UV shielding; 7. Room temperature curing operation, easy to operate; 8. Excellent stress relief capacity. Note: 1. To use two components are mixed, we must ensure that mixed; 2. If conditions permit, should be carried out row bubble process, if there is no discharge bulbs equipment should be in the mix to stand ten minutes during potting; clean holding container 3. Use, can not be mixed with other encapsulants, curing agent to avoid fire after contact alone sealed, please run out within the operational time after a two-component mixing.