LED Silicone

Recruitment Marketing Director Dongguan Shun trillion Silicone New Material Technology Co., Ltd., the investment manager, salesman. I. Features: LED silica gel medium viscosity one-component de-alcohol type RTV silicone adhesive sealant, this product model ZS-NJ-D939C high strength, good adhesion to aluminum, copper, stainless steel and other metals have good adhesion; excellent electrical properties, heat resistance, the general temperature range -60 ℃ ~ 200 ℃. Is released during the curing alcohols, polycarbonate (PC), copper and other non-corrosive material, in full compliance with the EU ROHS directive. Second, the typical use: LED bulb bonding and sealing; plastic, metal, glass and ceramics and other objects adhesive seal; bonding locate electronic circuit board of electronic components and reinforcement, moisture-proof seal. Third, the use of technology: 1, clean surface: will be sticky or coated clean and remove rust, dust and oil and so on. 2, sizing: unscrew (or cut open) hose cap, the glue has been pushed to clean the surface, so that distribution can be. 3, the cure: to be glued or sealed parts in the air let the natural cure. Curing process is a cure from the surface to the internal process within 24 hours (room temperature and 55% relative humidity) glue will solidify the depth of 2 ~ 4mm, if sizing position is deep, especially not easy access to the site of the air, Full curing time will be extended, if the temperature is low, the curing time will be extended, 6mm thick sealant to fully cure required more than seven days. Fourth, note: After the LED silicone glue to complete, unused plastic cap should be tightened immediately, kept under seal. When used again, if the seal a little crust, its removal can not affect the normal use. Glue in the storage process, the canal orifices may also appear small amounts of curing phenomenon, after the normal use of the clear, does not affect product performance. V. Packing: 100ml / support, 100 / box; 300ml / support, 25 / box. Sixth, storage and transportation: 1,25 ℃ cool dry environment following six months, more than the shelf life of the product should be confirmed before using no abnormality. 2, these products are non-dangerous goods, according to general chemical transport. CAUTION leakage during transport! Seven, recommendations and declarations Users are advised to do first before the formal use of LED silicone suitability test. Given the diversity of practical application, the company under certain conditions does not guarantee use of our problem with the product is not liable for any direct, indirect, or incidental damages, the user in the course of any problems, please contact our service department We will try to assist you. Zhao Shun Technology Supply: LED Silicone Source: Dongguan Shun trillion Silicone New Material Technology Co., Ltd. trillion sun Technology 15 years of silicone manufacturer, specializing in electronics, LED, household appliances, solar photovoltaic and other industries, with major clients to provide each kind of outstanding applications experience, with strong product development capabilities, was unanimously approved in the industry!