Power Driver Silicone

Recruitment Marketing Director Dongguan Shun trillion Silicone New Material Technology Co., Ltd., the investment manager, salesman. First, the product features and application power supply potting silicone is a low viscosity two-component addition cure silicone encapsulants, model ZS-GF-5299G can be cured at room temperature or heat cured, with the higher the temperature the faster curing Features. The goods in the curing reaction does not produce any by-products can be applied to the surface PC (Poly-carbonate), PP, ABS, PVC, etc. and metal class. Full compliance with EU ROHS directive. Second, potting protection typical use power modules; other electronic components potting protection Third, use of technology 1, before mixing: First, the A and B components in their respective container, stir. 2, mixed: A component shall comply with: B component = 1/1 weight ratio, and stir well. 3, discharge bulbs: rubber vacuum exhaust mixture should bubble for 1-3 minutes. 4, potting: The mixed rubber infusion should be filled as soon as possible to the product, in order to avoid late gum thickening and illiquid. 5. Cure: heat curing at room temperature can be. The higher the temperature, the faster the curing. When the temperature is low, the curing time to be extended. In the winter, take a long time to cure, it is recommended heating curing, cured for 15 minutes at 80 ~ 100 ℃, at room temperature normally takes about 12 hours to cure. IV Notes 1, plastic materials should be sealed and stored in a dry environment at room temperature, mixing a good plastic material should be used as soon as possible, to avoid wastage. 2, the product is non-dangerous goods, but not imported and the eye. 3, non-toxic, has good physical inertia, skin irritation and injury. The product does not contain flammable ingredients, will not cause a fire and accidents, no special requirements for transportation. 4, after a period of storage, plastic will be stratified. Please stir well before use, does not affect performance. 5, the following substances may hinder the curing of the product, or the occurrence of the phenomenon is not cured, so it's best after performing a simple experiment to verify the application, you need to clean the site of application if necessary. a, incompletely cured condensation silicone; b, (amine) curing type epoxy resin; c, wax welding (solderflux). V. Packing, storage and transportation 1, ① 20kg / group, A agent 10kg / barrel, B agent 10kg / barrel, plastic bucket; ② 40kg / group, A agent 20kg / barrel, B agent 20kg / barrel, plastic barrel. 2, the storage of this product is one year (25 ℃ or less), more than the shelf life of the product should be confirmed before using no abnormality. 3, these products are non-dangerous goods, according to general chemical transport. Six, recommendations and declarations are recommended before using the power silicone potting do first formal suitability test. Given the diversity of practical application, the company under certain conditions does not guarantee use of our problem with the product is not liable for any direct, indirect, or incidental damages, the user in the course of any problems, please contact our service department We will try to assist you. Zhao Shun Technology Supply: Power Driver Silicone Source: Dongguan Shun trillion Silicone New Material Technology Co., Ltd. trillion sun Technology 15 years of silicone manufacturer, specializing in electronics, LED, household appliances, solar photovoltaic and other industries, with large customers Experience a variety of excellent application program has a strong product development capabilities, was unanimously approved in the industry!