Shenzhen Bronte brand t8 led to T5 energy-saving lamp 16w 1.2 meters

T5 energy-saving benefits of the benefits of t8 turn led to T5 energy-saving lamp t8 led tube t8 led to T5 energy-saving lamp t8 led to T5 lamps in the following areas: 1, energy-saving lamps can replace the three now on the market Some T8 lamps, one is T5 / 28W, three-color phosphor lamp, energy saving rate: 44-28) /44*100%=36.4%, brightness and original T8 lamp similar to a year can save electricity: (44 * 0.364 / 1000 * 24H * 30D * 12M * 0.9 yuan / kWh = 124 yuan year warranty; a T5 / 20W (1200MM), three-color phosphor lamp, energy-saving rate: (44- 20) /44*100%=54.5%, since the patented reflector brightness of the original 115% -120% a year can save electricity: 44 * 0.545 / 1000 * 24H * 30D * 12M * 0.9 yuan / kWh = 186 yuan warranty 16 months; one is LED lamp T8 / 15W, LED high brightness lamp beads, energy saving rate: (44-15) /44*100%=65.9%, since a high-brightness LED lamp beads, the brightness is 95% -110% of the original, a high temperature, partial white, a year can save electricity: 44 * 0.659 / 1000 * 24H * 30D * 12M * 0.9 yuan / kWh = 225 yuan warranty 60. months; by comparison found three kinds of tubes: led lamp more energy-efficient, longest life expectancy using led lamp 2 is indeed cost-effective, easy to replace the lamp in the original unplug the appliance start, remove the tube, then change. T5led saving lamp on it, usually within 15 seconds for a good one. No great replacement costs, but without accessories produced for the original lamp inductor rectifier rectifier generally not as demolition, the purpose is to T5 lamps have a protective effect, reducing Pressure and stable voltage Power consumption is only 0.4W, so do not make changes. But be careful, if the original lamp electronic rectifier (no starter) it can not be directly replaced, need to be modified, but this is also no more than the cost. is the original electronic ballast short without power cable directly to the two lamp pins. 3, does not hurt the eyes T5 energy-saving fluorescent lamps using a high-frequency electronic ballast, lamp and students is the same frequency, So during use and does not feel the beating of the lamp, compared to ordinary fluorescent t8 is QQ, that is a low-end cars, a senior BMW BMW car. long time and will not fatigue and produce work in this lamp eye The die burnt sense, easy to deterioration of eyesight 4, to increase the capacity of the transformer and reduce reactive power ordinary T8 lamp current is 0.43A, voltage is 220V, the power factor is about 0.45, so it's apparent power: 220 * 0.43 = 94.6W, the actual use of the power of 220 * 0.43 * 0.45 = 43W; T5 lamp same terms if the current is 0.093A, voltage is 220V, the power factor is about 0.95, so its apparent power: 220 * 0.093 = 20.5 W, the actual use of the power of 220 * 0.093 * 0.95 = 19.5W. If a 100KVA transformer, if equipped, then you can use T8 lamp: 100 * 1000 / 94.6 = 1057 lights. If it is equipped with T5 lamps, then you can use: 100 * 1000 / 20.5 = 4878. The same 1000 lamp, T8 capacity of 94.6KVA, and T5 lamps only 20.5KVA, they are able to increase the capacity of 74KVA. If your billing is based on the maximum power transformer billing, then you are a power moon You can save this one: 74 * 38 = 2812 yuan. You can take more appliances. Transformers is more secure because the excess electricity and tripping. Using energy-saving T8 led tube material do T5LED lamp, the first is the cost will decline, and the second is light emitting area will increase, diameter 16mm into 26mm, to facilitate the production. The third installation is also easy. T5 energy-saving benefits of t8 led tube of Bronte currently used way there: T5 integration led energy saving lamp, bracket lamp into one, better heat dissipation for the newly installed energy-saving lamps, also known as split T5led T5 single-tube LED lamp, power supply built-in, you can replace specific to Which? Look customers to choose, there is always a right for you. www.ledlongtech.com www.yiduo.net www.szyiduo.com