Led electronic screen how to set the parameters of how the operation led display software

10mm pixel pitch of the pixels color red + green + blue pixels 1R1G1B pixel density 10000pixels / m2 unit box (PH10 outdoor full color LED display) Cabinet Resolution 96 dots wide × high 96 points Case Size 960mm × 960mm Case the number of pixels 4096 dots / box Module resolution with 16 dots × high 16 points module size 160mm × height 160mm length the number of modules 16 / box display the entire screen (PH10 outdoor full color LED display) Viewing Angle Horizontal 120 °, vertical 120 ° Storage Temperature -40 ℃ ~ + 85 ℃ Operating Temperature -30 ℃ ~ + 50 ℃ Relative humidity 10% to 95% Cabinet thickness standard box 135 + 35mm simple box 85 + 35mm waterproof rating IP65 ( front), IP54 (back) power supply (PH10 outdoor full-color LED) Operating voltage AC 88 ~ 132V or 176 ~ 264V Average power 400 ~ 800W / m Maximum power consumption 650W / m control system (PH10 outdoor full color LED display screen) OS WIN 98/2000 / XP DVI graphics card control synchronization refresh rate ≥180Hz (optional hardware support under conditions) grayscale / color 16K, 4K (optional) / Display 16.7M Colors Brightness adjustment Software 16 adjustable control system using PCTV card (optional) + DVI card + control card + optical transmission main technical parameters (PH10 outdoor full color LED display) drive device constant current drive mode 1/4 sweep refresh rate> 300Hz Brightness > 5500cd / m2 video signal S-Video, RGB, Composite, DVI MTBF 100,000 hours flatness ≥5000 hours of life between any adjacent pixels ≤0.5mm module splicing clearance <1mm uniformity of the pixel light intensity, cell board Brightness uniformity blind spot rate <0.0002 switching power supply load 5V / 40A, 5V / 30A computer display mode 1024 × 768 Effective communication distance cable 100m (without relay), multimode fiber 500m, single mode fiber 20km software LED Studio (MDK)