Shandong supply Led Fiber Optic Light Caramel decorative lights

Led fiber optic lights decorative lights Introduction Camry Camry led fiber core due to the high purity material, which effectively reduces the transmission of light attenuation, to the efficient transmission of light, because of its high purity, low attenuation, easy installation and reliability, safety, environmental protection, flexibility, integrity, can produce colorful, dreamlike visual effects and no UV, low heat, no electrical burn register, long service life, rich color changes, good durability and plasticity characteristics, so is considered an ideal material to replace the existing decorative lighting. Light conducting fiber itself only conductive, in actual use, the tail end of an optical fiber to be connected to a light source device, simply set the function of the light source device, which can easily control the intensity of light emitted, colors and changing cycle, fiber optic systems power consumption is equivalent to only about 50% of the same luminosity ordinary light, and fully achieve the purpose of saving energy, it can not only save a lot of construction costs, but also to avoid the tedious maintenance work in the future. Contact: Cao female fixed: 18264102381 QQ: 858297280. Features 1. A single light source may include a plurality of light-emitting properties of the same luminous points; 2. source easy to replace, but also easy to maintain; The light emitting device can be placed in hard to reach the position of non-professionals, it has anti-destructive; 4. No ultraviolet and infrared light, can reduce some of the items such as artifacts, textiles damage; 5.Viewing point miniaturization, light weight, easy to replace, install, can be made very small size, placed in the glass or other small object glows special decorative lighting effects; 6. No electromagnetic interference, can be applied in special places MRI room, radar control room of the electromagnetic shielding requirements; 7. No spark, no shock hazard, can be used in chemical, oil and gas platforms, fountains, swimming pools, which are fire, explosive or water-wet and special places; 8. Can automatically transform light color; 9. reusable, saving investment; 10. The soft and easy to fold non-friable, easily processed into a variety of different patterns; heating system below the general lighting systems, air-conditioning system can reduce the power consumption. Fiber optic lighting system consisting of fiber optic lighting systems 1. System configuration can be divided into point light (that is, the end of the light) system and line light (ie side light) systems. 2. System components (1) light emitting device emitting device comprising a light source, a reflector, ultraviolet (UV) and infrared (IR) filter and rotary glass color wheel (optional). Depending on its internal distribution source, generally divided into two kinds of tungsten halogen lamp series and series metal halide lamps. Wherein the tungsten-halogen light source power is generally 50W or 75W, input voltage AC 12V (device comes with power adapter), for museums or galleries and other temperature and humidity and ultraviolet light, infrared control required special place; metal halide light source power is generally 150W or 200W, input voltage AC 220V, suitable for building contour lighting and facade lighting brightness higher places. Depending on the degree of protection, the light emitting device generally divided into indoor and outdoor two. Rotating glass color wheel can match up to eight colors automatically change. The device can be controlled by setting the computer program changes, but also by the sound system output audio signal synchronization control. The device comes with power plug for the power supply for AC 220V, 50Hz. (2) Light-emitting semiconductor light emitting conductor is generally made of plastic or glass fiber bundle or a single plastic fibers, taking into account the transmission of light attenuation, and its length is generally not more than 30m. It can be solved by a series system. Common lightening conductor has the following two ways: 1. Point the light emitting fiber optic-fiber cover very thin plastic or glass fiber coating to prevent light spilled outside, the outer layer of opaque liner and a layer of plastic, rubber or metal silk heat-resistant, anti-UV protective sleeve (used to protect and support the fiber), sub indoor and outdoor waterproof type two, with a light-emitting end fittings are required. 2. fiber optic lighting optical fiber cable with a special structure, a long pass light, there is a layer of transparent outer layer and a layer of heat-resistant, UV-resistant PVC transparent protective sleeve having an outer diameter specifications are 8mm, 11mm and 15mm are three, sub-standard indoor and outdoor waterproof type two, are required with a non-luminous terminal attachments. (3) whether the terminal attachment point or line light-emitting end of the light-emitting optical fiber, are required to configure the terminal attachments. According to the light emitting point emitting optical fiber and optical fiber cable of different luminescent characteristics, there are two types of terminal attachment: 1. emitting Terminal Accessories: Configure emitting dot light emitting fiber optic terminal or direct attachment of various types of reflective type is similar to the lamp, there lamp type, with a lens type (condenser or may be diverging), ground and underwater special-type terminal. 2. The non-luminous Terminal Accessories: Configuration online emitting fiber optic terminal, opaque hermetic envelope. Since fiber optic lighting application has many features, making its application is broad, now explain their typical applications are analyzed according to different locations and results. 1. Desktop videoconferencing end lighting with lighting system, the condensing lens-emitting terminal attachment from the top of the vertical exposure, in a desktop form point spot, through co-participants to read and write without affecting the slide projector was to explain (in general lighting off or reduce the brightness of the case). 2. Put the top of the high and difficult or impossible to maintain the effect of the lighting load of places will end lighting system for the lobby of the stars tall dome shape, with diverging lens-emitting terminal attachment and rotary glass color plate can form stars sparkling dynamic effects, far from the general lighting systems comparable. 3. Guidance Lighting outdoor public area of ??the building with floor-tube (line light) system or buried in place of Chen style guide (the end of the light) system is used for sign lighting, compared with the general illumination light source reduces maintenance workload, and there is no risk of leakage. The outdoor fountain underwater lighting with the end of the lighting system, the configuration of underwater type terminal for outdoor fountain underwater lighting, sound system and audio signals output by the synchronization control light output and light color transformation. Its lighting effects and safer than conventional low-pressure underwater lighting system, and easy to maintain, no risk of leakage. 5. building outline lighting and facade lighting using light emitting system and the end of the line lighting system combination, were building round Guo and facade lighting. Such as Hong Kong Bank of China Tower facade Christmas decorative lighting system that trendy patterns, rich color variations. Its convenient construction, installation cycle is short, with a strong timeliness, and can be reused, saving investment. 6. Building local indoor lighting with the end of the lighting system, the condensing lens type or terminal type light diverging lens attachment for the local interior lighting. Such as temperature and humidity inside the Louvre museum and the ultraviolet, infrared control required special silk artifacts, local lighting paintings or prints cultural relics, uses fiber optic lighting systems. 7. Building billboard lighting optical fiber soft and easy to break open wire not fragile, easily processed into a variety of different patterns, no shock hazard, no high-voltage transformer, can automatically change light color, and to facilitate the construction and installation, can be reused. Therefore, is often used to set a billboard on a building compared with traditional neon, fiber optic lighting has obvious advantages.